IR25600SPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2004 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 625mW |
| Technology | CMOS |
| Voltage - Supply | 6V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 15V |
| Base Part Number | IR25600 |
| Number of Outputs | 2 |
| Output Voltage | 20V |
| Max Output Current | 3.3A |
| Power Supplies | 15V |
| Nominal Supply Current | 1.5A |
| Power Dissipation | 625mW |
| Output Current | 1.5A |
| Propagation Delay | 160 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 160 ns |
| Rise Time | 35ns |
| Fall Time (Typ) | 25 ns |
| Turn-Off Delay Time | 150 ns |
| Rise / Fall Time (Typ) | 15ns 10ns |
| Interface IC Type | HALF BRIDGE BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2.3A 3.3A |
| Logic Voltage - VIL, VIH | 0.8V 2.7V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IR25600SPBF Overview
A higher level of flexibility is provided by its 8-SOIC (0.154, 3.90mm Width) package.The packaging method is indicated by Tube.It's mounted on the way to Surface Mount.In the absence of a 6V~20V supply voltage, it can demonstrate its superiority.Gate type IGBT, N-Channel MOSFET is designed for it.This device is allowed to operate in a temperature range of -40°C~150°C TJ.Mosfet driver uses Non-Inverting as Mosfet drivers input type.Initially, the configuration is composed of 8 terminations.Mosfet driver is possible to find various related parts under Mosfet drivers base part number IR25600.Mosfet driver is mounted using the Surface Mount method.The pins are configured with 8 when designing the chip.This device operates with 15V supply voltage.The interface chip of the system is HALF BRIDGE BASED PERIPHERAL DRIVER.3.3A is the maximum output current.There are several useful electronic components found in its subcategory of MOSFET Drivers.Based on its basis, it integrates 2 outputs.Mosfet gate drivers can deliver a current of 1.5A.Considering its maximum power dissipation, 625mW shows its maximum capacity to transfer and conduct power loss without overheating.With its 15V power supply, it provides power for diverse applications.In this case, it outputs 20V voltage.
IR25600SPBF Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
Maximum power dissipation of 625mW
IR25600SPBF Applications
There are a lot of Infineon Technologies IR25600SPBF gate drivers applications.
- Broadcast equipment
- Active filtering
- High-speed communications
- DC-DC Converters
- DC/DC converters
- Commercial and agricultural vehicles (CAV)
- LCD/LCoS/DLP portable and embedded pico projectors
- Motor Drives
- Isolated Supplies for controller area network (CAN),
- Head-up and Head mounted displays
