IR25601SPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 1996 |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 625mW |
| Technology | CMOS |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 15V |
| Base Part Number | IR25601SPBF |
| Output Voltage | 20V |
| Max Output Current | 130mA |
| Power Supplies | 15V |
| Nominal Supply Current | 130mA |
| Power Dissipation | 625mW |
| Output Current | 130mA |
| Propagation Delay | 330 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 50 ns |
| Rise Time | 300ns |
| Fall Time (Typ) | 170 ns |
| Turn-Off Delay Time | 330 ns |
| Rise / Fall Time (Typ) | 200ns 100ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 60mA 130mA |
| Logic Voltage - VIL, VIH | 0.8V 2.3V |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IR25601SPBF Overview
A higher degree of flexibility is achieved by adopting its 8-SOIC (0.154, 3.90mm Width) package.Tube represents the package.2 drivers are incorporated for its configuration.There is a mounting bracket in the way of Surface Mount.Using a 10V~20V supply voltage, gate drivers is capable of demonstrating Gate driverss superiorGate driversy.The gate type on this device is IGBT, N-Channel MOSFET.This device allows temperatures in the range of -40°C~150°C TJ.Input type of Non-Inverting is used.Its configuration is based on a total of 8 terminations.Mosfet driver contains a variety of related parts under Mosfet drivers base part number IR25601SPBF.You mount it with Surface Mount.In the device, there are 8 pins.A supply voltage of 15V is required for operation.An output current as high as 130mA can be achieved at maximum power.There are several useful electronic components found in its subcategory of MOSFET Drivers.The high-side voltage - Max (Bootstrap) can be up to 600V.The output current can be set to 130mA.This device has a maximum power dissipation of 625mW, indicating that it is capable of reducing power loss without overheating.Based on its power supplies of 15V, it solves the problem of power supply failure for a variety of applications.Mosfet gate drivers outputs 20V as voltage.
IR25601SPBF Features
Embedded in the Tube package
2 drivers
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 625mW
IR25601SPBF Applications
There are a lot of Infineon Technologies IR25601SPBF gate drivers applications.
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Motor controllers
- 3-Phase Motor Inverter Driver
- DC-DC Converters
- Isolated Supplies for Motor Control
- High-voltage isolated DC-DC converters
- Active filtering
- RGB applications
- High current laser/LED systems
- Power factor correction (PFC) circuits
