IR25601STRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 540.001716mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 1996 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 625mW |
| Technology | CMOS |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 15V |
| Base Part Number | IR25601SPBF |
| Output Voltage | 20V |
| Max Output Current | 130mA |
| Power Supplies | 15V |
| Operating Supply Current | 240μA |
| Power Dissipation | 625mW |
| Output Current | 130mA |
| Propagation Delay | 330 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 50 ns |
| Rise Time | 300ns |
| Fall Time (Typ) | 170 ns |
| Turn-Off Delay Time | 330 ns |
| Rise / Fall Time (Typ) | 200ns 100ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 60mA 130mA |
| Logic Voltage - VIL, VIH | 0.8V 2.3V |
| High Side Voltage - Max (Bootstrap) | 600V |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IR25601STRPBF Overview
Gate drivers provides greater flexibilGate driversy to use the 8-SOIC (0.154, 3.90mm Width) package.A package of Tape & Reel (TR) has been used.The configuration is supported by 2 drivers.Surface Mount is mounted in the way.In the absence of a power supply voltage of 10V~20V V, it is able to demonstrate its superiority.Gate drivers is designed wGate driversh a IGBT, N-Channel MOSFET gate.This device is allowed to operate in a temperature range of -40°C~150°C TJ.Input type of Non-Inverting is used.Mosfet driver consists of 8 terminations as Mosfet drivers foundation.The base part number IR25601SPBF refers to a number of related parts.In this case, Surface Mount indicates how the device is mounted.As a result, it is configured with 8 pins when it is designed.A voltage of 15V is required for its operation.Mosfet driver is possible to achieve a maximum output current of 130mA.Its subcategory of MOSFET Drivers contains various useful electronic components.There can be a voltage up to 600V on the high-side (Bootstrap).130mA is the maximum output current supported by the device.According to its maximum power dissipation, 625mW is capable of conducting and transferring a large amount of power without overheating.Using its power supply of 15V, it provides solutions to diverse power supply problems.As a result, a voltage of 20V is produced.With a voltage of 240μA, it operates with a constant current.
IR25601STRPBF Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 625mW
IR25601STRPBF Applications
There are a lot of Infineon Technologies IR25601STRPBF gate drivers applications.
- 3-Phase Motor Inverter Driver
- DC-DC Converters
- High frequency line drivers
- High-voltage isolated DC-DC converters
- Motor Drives
- Portable computers
- Isolated Gate Driver Supplies
- Video amplifiers
- Telecom switch mode power supplies
- Isolated Supplies for Motor Control
