IR25603STRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 540.001716mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 1996 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 625mW |
| Voltage - Supply | 10V~15.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 12V |
| Frequency | 106kHz |
| Base Part Number | IR25603 |
| Number of Outputs | 2 |
| Max Output Current | 260mA |
| Operating Supply Current | 5mA |
| Power Dissipation | 625mW |
| Output Current | 260mA |
| Max Supply Current | 5mA |
| Input Type | RC Input Circuit |
| Rise Time | 150ns |
| Fall Time (Typ) | 100 ns |
| Rise / Fall Time (Typ) | 80ns 45ns |
| Channel Type | Synchronous |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 180mA 260mA |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IR25603STRPBF Overview
The 8-SOIC (0.154, 3.90mm Width) package provides greater flexibility.The packaging method is indicated by Tape & Reel (TR).Ideally, it should be mounted in the direction of Surface Mount.In the absence of a 10V~15.6V supply voltage, its superiority can be demonstrated.Gate drivers is designed wGate driversh a gate type of N-Channel MOSFET.In this device, temperatures must not exceed -40°C~150°C TJ.The input type is RC Input Circuit.There are 8 terminations to form the base of its configuration.Numerous related parts can be found under its base part number IR25603.You mount it with Surface Mount.When designing, the device is configured with 8 pins.Mosfet driver is specifically designed to opeate wMosfet driverh a supply voltage of 12V.An output current as high as 260mA can be achieved at maximum power.Within this subcategory of MOSFET Drivers, there are several useful electronic components.Mosfet driver is possible to set the high-side voltage - Max (Bootstrap) to 600V.The basis has 2 integrated outputs.260mA is the maximum output current supported by the device.Considering its maximum power dissipation, 625mW shows its maximum capacity to transfer and conduct power loss without overheating.In order to ensure greater stability, it is recommended to keep the supply current at 5mA.The supply voltage of this device is 5mA and it operates with that voltage.A higher frequency of 106kHz will improve efficiency.
IR25603STRPBF Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 625mW
IR25603STRPBF Applications
There are a lot of Infineon Technologies IR25603STRPBF gate drivers applications.
- Isolated Gate Driver Supplies
- Isolated switch mode power supplies (SMPS)
- Line drivers
- Automotive Applications
- Industrial Motor Inverter - Power Tools, Robotics
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Pulse transformer drivers
- PCMCIA applications
- Active filtering
- Commercial and agricultural vehicles (CAV)
