IR25604STRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 540.001716mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 1996 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 625mW |
| Technology | CMOS |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 15V |
| Base Part Number | IR25604SPBF |
| Output Voltage | 20V |
| Max Output Current | 350mA |
| Power Supplies | 15V |
| Operating Supply Current | 180μA |
| Power Dissipation | 625mW |
| Output Current | 350mA |
| Propagation Delay | 300 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 30 ns |
| Rise Time | 220ns |
| Fall Time (Typ) | 80 ns |
| Turn-Off Delay Time | 280 ns |
| Rise / Fall Time (Typ) | 150ns 50ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 200mA 350mA |
| Logic Voltage - VIL, VIH | 0.8V 2.9V |
| High Side Voltage - Max (Bootstrap) | 600V |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IR25604STRPBF Overview
Gate drivers provides greater flexibilGate driversy to use the 8-SOIC (0.154, 3.90mm Width) package.Tape & Reel (TR) represents the package.Configuration is supported by 2 drivers.Surface Mount is mounted in the way of the device.In the absence of a 10V~20V supply voltage, it can demonstrate its superiority.IGBT, N-Channel MOSFET is the gate type used for this design.Temperature range -40°C~150°C TJ is allowed for this device.Input type of Non-Inverting is used.There are 8 terminations to form the base of its configuration.Mosfet driver is possible to find various related parts under Mosfet drivers base part number IR25604SPBF.The mount method is Surface Mount.At the time of design, it is configured with 8 pins.In addition, it is specifically designed to operate with a supply voltage of 15V.In the maximum case, the output current can be 350mA volts.There are several useful electronic components within its subcategory MOSFET Drivers.A high-side voltage can be set up to 600V (Bootstrap).The output current can be set to 350mA.According to its maximum power dissipation, 625mW is capable of conducting and transferring a large amount of power without overheating.With its power supplies of 15V, it solves the problems of power supply for a variety of applications.In this case, the voltage output is 20V.Mosfet gate drivers operates wMosfet gate driversh the supply voltage of 180μA.
IR25604STRPBF Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 625mW
IR25604STRPBF Applications
There are a lot of Infineon Technologies IR25604STRPBF gate drivers applications.
- Power factor correction (PFC) circuits
- General Purpose 3-Phase Inverter
- High current laser/LED systems
- Active filtering
- Isolated Supplies for Motor Control
- Commercial and agricultural vehicles (CAV)
- Head-up and Head mounted displays
- Isolated Gate Driver Supplies
- Isolated Supplies for controller area network (CAN),
- 3-Phase Motor Inverter Driver
