IR25606SPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 1996 |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 625mW |
| Technology | CMOS |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 15V |
| Base Part Number | IR25606SPBF |
| Number of Outputs | 2 |
| Output Voltage | 20V |
| Max Output Current | 350mA |
| Power Supplies | 15V |
| Nominal Supply Current | 200mA |
| Power Dissipation | 625mW |
| Output Current | 200mA |
| Propagation Delay | 300 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 46 ns |
| Rise Time | 220ns |
| Fall Time (Typ) | 80 ns |
| Turn-Off Delay Time | 280 ns |
| Rise / Fall Time (Typ) | 150ns 50ns |
| Channel Type | Independent |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 200mA 350mA |
| Logic Voltage - VIL, VIH | 0.8V 2.9V |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IR25606SPBF Overview
A higher degree of flexibility is achieved by adopting its 8-SOIC (0.154, 3.90mm Width) package.A packaging method of Tube is used.Surface Mount is mounted in the way.By using 10V~20V supply voltage, it is able to demonstrate its superiority.Gate type IGBT, N-Channel MOSFET is designed for it.Mosfet driver is possible to use this device at temperatures as low as -40°C~150°C TJ.Non-Inverting is used as the input type in this program.As a result of its configuration, it contains a maximum of 8 terminations.Under its base part number IR25606SPBF, various related parts can be found.Surface Mount is the way it takes to mount the device.Mosfet driver is configured wMosfet driverh 8 pins when designing.With a supply voltage of 15V, it is designed to operate.In the maximum case, the output current can be limited to 350mA.Within this subcategory of MOSFET Drivers, there are several useful electronic components.A boot strap voltage of 600V is the maximum possible high-side voltage.Mosfet driver has been integrated wMosfet driverh a total of 2 outputs for Mosfet drivers basis.The device is capable of delivering a current of 200mA.Based on the maximum power dissipation of 625mW, it is clear that it is capable of transferring and conducting power losses without becoming overheated.With its 15V power supply, it provides power for diverse applications.As a result, a voltage of 20V is produced.
IR25606SPBF Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 625mW
IR25606SPBF Applications
There are a lot of Infineon Technologies IR25606SPBF gate drivers applications.
- Dual-Battery Systems
- Solar power supplies
- Uninterruptible Power Supplies (UPS)
- Topologies
- Motor Control
- Pulse transformer drivers
- Commercial and agricultural vehicles (CAV)
- 3-Phase Motor Inverter Driver
- Isolated switch mode power supplies (SMPS)
- Industrial Motor Inverter - Power Tools, Robotics
