IR25607STRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Weight | 665.986997mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 1996 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1.25W |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 15V |
| Base Part Number | IR25607SPBF |
| Output Voltage | 20V |
| Max Output Current | 2.5A |
| Power Supplies | 15V |
| Operating Supply Current | 340μA |
| Power Dissipation | 1.25W |
| Output Current | 2A |
| Propagation Delay | 150 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 20 ns |
| Rise Time | 35ns |
| Fall Time (Typ) | 25 ns |
| Turn-Off Delay Time | 94 ns |
| Rise / Fall Time (Typ) | 25ns 17ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2.5A 2.5A |
| Logic Voltage - VIL, VIH | 6V 9.5V |
| High Side Voltage - Max (Bootstrap) | 600V |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IR25607STRPBF Overview
A higher degree of flexibility is achieved by adopting its 16-SOIC (0.295, 7.50mm Width) package.Tape & Reel (TR) is the packaging method.A total of 2 drivers are integrated into its configuration.Gate drivers is mounted in the way of Surface Mount.Gate drivers is able to show Gate driverss superiorGate driversy on the basis of a supply voltage of 10V~20V.A gate type of IGBT, N-Channel MOSFET is used in its design.-40°C~150°C TJ is the allowed temperature range for this device.Non-Inverting is the input type used in this program.16 terminations constitute its foundation.There are numerous related parts listed under its base part number IR25607SPBF.In this case, Surface Mount indicates how the device is to be mounted.At the time of design, it is configured with 16 pins.Specification is for 15V supply voltage operation.An output current as high as 2.5A can be achieved at maximum power.There are several useful electronic components within its subcategory MOSFET Drivers.Maximum (Bootstrap) voltage can be up to 600V.The output current supported by the device is 2A.According to its maximum power dissipation, 1.25W is capable of conducting and transferring a large amount of power without overheating.With its power supplies of 15V, it solves the problems of power supply for a variety of applications.In this case, it produces a voltage of 20V.During operation, a voltage of 340μA is applied to the power supply.
IR25607STRPBF Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of IGBT, N-Channel MOSFET
16 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 1.25W
IR25607STRPBF Applications
There are a lot of Infineon Technologies IR25607STRPBF gate drivers applications.
- serial peripheral interface (SPI), I2C
- Isolated switch mode power supplies (SMPS)
- Topologies
- Line drivers
- Digitally controlled power supplies
- Dual-Battery Systems
- White Goods - Air Conditioner, Washing Machine,
- Pulse transformer drivers
- High power buffers
- Portable Navigation Devices
