IR3316STRLPBF
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-5, D2Pak (4 Leads + Tab), TO-263BB |
| Number of Pins | 5 |
| Supplier Device Package | D2Pak (SMD-220 5-Lead) |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 5.5mOhm |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Power Rating | 2W |
| Max Power Dissipation | 2W |
| Base Part Number | IR3316SPBF |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 23A |
| Operating Supply Voltage | 26V |
| Voltage | 26V |
| Interface | On/Off |
| Max Supply Voltage | 26V |
| Current - Output (Max) | 23A |
| Current | 23A |
| Output Configuration | High Side |
| Power Dissipation | 2W |
| Output Current | 7A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Current per Channel | 23A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V~26V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature |
| Rds On (Typ) | 5.5mOhm |
| Height | 4.826mm |
| Length | 10.668mm |
| Width | 11.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
IR3316STRLPBF Overview
As a result, it is packaged in the form of a Tape & Reel (TR).The TO-263-5, D2Pak (4 Leads + Tab), TO-263BB package contains it.In this case, the LED driving board is mounted as Surface Mount.It owns the General Purpose switch type.Ensure reliable operation by setting the temperature to -40°C~150°C TJ.There is a default setting of 1 for output.It uses a supply voltage of Not Required to operate.It has a maximum output voltage of N-Channel volts.I believe it belongs to the IR3316SPBF family.The 5 pins are used for the operation of the system.In this case, the LED driving board can produce only 23AV as its maximum output.The maximum output current must drop to 23A to meet the operation criteria.It is mounted in the way of Surface Mount.There is 5.5mOhm resistance on the LED driver.When this case is used, the output current is set to 7A.The supply voltage should be set at 26V for best efficiency.The maximum operating temperature of 150°C°C allows for stable operation.It operates at a minimum working temperature of -40°C degrees Celsius to ensure reliability.It can handle a maximum voltage of 26VV.
IR3316STRLPBF Features
Resistance of 5.5mOhm
IR3316STRLPBF Applications
There are a lot of Infineon Technologies IR3316STRLPBF Power Switches ICs applications.
- Set-top-box
- Various applications equipped with buttons
- Wireless Headsets
- Storage (HDDs, SSDs)
- Notebook PC
- Portable GPS Device
- Notebook and Tablet Computers
- Gaming
- USB Ports/Hubs
- Hot-Swap Systems
