IR3316STRRPBF
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-5, D2Pak (4 Leads + Tab), TO-263BB |
| Number of Pins | 5 |
| Supplier Device Package | D2Pak (SMD-220 5-Lead) |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 5.5mOhm |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Power Rating | 2W |
| Max Power Dissipation | 2W |
| Current Rating | 23A |
| Base Part Number | IR3316SPBF |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 100A |
| Operating Supply Voltage | 26V |
| Voltage | 26V |
| Interface | On/Off |
| Current - Output (Max) | 23A |
| Current | 23A |
| Output Configuration | High Side |
| Power Dissipation | 2W |
| Output Current | 7A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Current per Channel | 23A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V~26V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature |
| Rds On (Typ) | 5.5mOhm |
| Height | 4.826mm |
| Length | 10.668mm |
| Width | 11.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
IR3316STRRPBF Overview
As a result, it is packaged in the form of a Tape & Reel (TR).There is a TO-263-5, D2Pak (4 Leads + Tab), TO-263BB package that includes it.Mounting type Surface Mount is selected for the LED driving board.This switch is of type General Purpose.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.By default, it is set to output 1.In order to operate, it requires a voltage supply of Not Required.A maximum voltage of N-Channel volts is available from the output of this LED driver.It belongs to the family IR3316SPBF.The operation is performed through the 5 pins.There is a maximum output of 23AV from the LED driver.Maximum output current falls to 100A when operation criteria are met.Surface Mount is mounted in the way of this LED driving board.Lighting drivers with 5.5mOhm resistance are used.When this case is used, the output current is set to 7A.For maximum efficiency, the supply voltage should be set to 26V.Stable operation is possible with a maximum operating temperature of 150°C°C.To ensure reliability, it should operate at -40°C degrees Celsius.
IR3316STRRPBF Features
Resistance of 5.5mOhm
IR3316STRRPBF Applications
There are a lot of Infineon Technologies IR3316STRRPBF Power Switches ICs applications.
- HDD, SSD
- Portable GPS
- USB Power Distribution
- Gaming
- Portable Music Players
- Hot Swaps
- Wearable Devices
- Handheld Devices
- Solid-State Drives
- PDAs
