IR3621MTRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount, Through Hole |
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Number of Pins | 32 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Frequency | 500kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | IR3621MPBF |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 14.4V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 14.5V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 5.5V~14.5V |
| Control Features | Frequency Control, Power Good, Soft Start |
| Input Voltage (Min) | 5.5V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Output Current-Max | 0.044A |
| Frequency - Switching | 200kHz~500kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PHASE-SHIFT |
| Max Duty Cycle | 86.5 % |
| Height Seated (Max) | 1mm |
| Length | 5mm |
| Width | 5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
IR3621MTRPBF Overview
Capsuled in the 32-VFQFN Exposed Pad package, the switching controller can be used for a wide range of applications. It is sufficient to generate 2 outputs with this dc motor controller. PMIC packaging is solid with a Tape & Reel (TR) enclosure. Transistor Driver dc switching's outputs (s) can be handled by it. This dc control has a supply voltage and operating voltage of 5.5V~14.5V. Worked in an dc switcher with a -40°C~125°C TJ rating. It can switch at 200kHz~500kHz. dc dc regulators can be carried out with Surface Mount. Frequency Control, Power Good, Soft Start provides dcdc regulator efficient switching control. The switch converters are connected to an analog IC with a DUAL SWITCHING CONTROLLER output. Switching converters are designed with the terminal (s) at position QUAD . 32 terminations with a variety of function. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's input voltageis 12V volts. You can find other relevant dc to dc converter ics by searching "IR3621MPBF". There are a total of 32 pins on switching converter. Switching converter is a type of Switching Regulator or Controllers in particular. An input voltage of 5.5V is the minimum required for the dc dc voltage regulator. Statistically, the DC regulator outputs 14.4V voltage. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 86.5 %. In most applications and prototype designs, DC switcher is qualified as a Surface Mount, Through Hole. There is 500kHz frequency setting on the switching controller. If the user wishes to run the voltage regulator dc to dc in a circuit safely and reliably, they should apply 14.5V. Whenever the current value is 0.044A, switching converter outputs the highest possible value.
IR3621MTRPBF Features
Transistor Driver Outputs
Switching Frequency: 200kHz~500kHz
Frequency Control, Power Good, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 86.5 %
Frequency: 500kHz
IR3621MTRPBF Applications
There are a lot of Infineon Technologies IR3621MTRPBF DC to DC converter applications.
- Domestic water pumps
- Computed tomography (CT)
- Communication system
- Electric heating, lighting
- Adjustable voltage or current linear circuits
- Cutting machine tools
- Electrical power transmission
- Product testing
- Industrial robots
- seismic instrument power circuits
