IR3622MTRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount, Through Hole |
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Number of Pins | 32 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | IR3622MPBF |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 800mV |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 14.5V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Operating Supply Current | 20mA |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 7.5V~14.5V |
| Control Features | Current Limit, Enable, Frequency Control, Power Good, Sequencing, Soft Start, Tracking |
| Input Voltage (Min) | 7.5V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 200kHz~600kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 25ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 25 ns |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 600kHz |
| Max Duty Cycle | 84 % |
| Isolation | Non-Isolated |
| Height | 880μm |
| Length | 4.9784mm |
| Width | 5.0038mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
IR3622MTRPBF Overview
It comes in a 32-VFQFN Exposed Pad package, so switching controller can be used for most applications. There is enough capacity in the dc motor controller to generate the output for the 2 input. Tape & Reel (TR) solid enclosure protects the pmic. The system can process Transistor Driver dc switching's outputs (s). This dc control has a supply voltage and operating voltage of 7.5V~14.5V. Suitable for a -40°C~125°C TJ dc switcher. The switching controller is capable of switching at the 200kHz~600kHz position. The Surface Mount makes it ideal for general dc dc regulator. To ensure efficient switching, this dcdc regulator features a Current Limit, Enable, Frequency Control, Power Good, Sequencing, Soft Start, Tracking. The switch converters are connected to an analog IC with a DUAL SWITCHING CONTROLLER output. The switching converters's terminals (s) are designed at QUAD. A variety of 32 terminations are available in dc switching. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. 12V nominal DC switcher's voltage input. Search for "IR3622MPBF" to find other relevant dc to dc converter ics. There are a total of 32 pins on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. It is recommended to use 7.5V as the minimum input voltage of dc dc voltage regulator. Statistically, the DC regulator outputs 800mV voltage. The maximum duty cycle of this voltage regulator dc to dc is set to 84 % to ensure reliability during power-up and power-down. DC switcher's Surface Mount, Through Hole qualifies it for most applications and prototypes. DC regulators have a maximum frequency of 600kHz. A circuit should contain 14.5V in order to ensure the voltage regulator dc to dc runs safely and reliably. A current of 20mA is supplied to it.
IR3622MTRPBF Features
Transistor Driver Outputs
Switching Frequency: 200kHz~600kHz
Current Limit, Enable, Frequency Control, Power Good, Sequencing, Soft Start, Tracking
PULSE WIDTH MODULATION
Max Duty Cycle: 84 %
IR3622MTRPBF Applications
There are a lot of Infineon Technologies IR3622MTRPBF DC to DC converter applications.
- Production lines
- Industrial robots
- Access control systems
- Flexible manufacturing cells
- Smart grid
- Hydro power
- Medical monitoring systems
- Terrestrial set-top boxes
- Network technology
- Wind power
