IR3623MTRPBF

32 Terminals 8.5V~14.5V 32-Pin IR3623MPBF DC to DC converter ICDUAL SWITCHING CONTROLLER 2 Outputs 200kHz~1.2MHz PWM Signal

Manufacturer: Infineon Technologies
Nocochips NO: 376-IR3623MTRPBF
Package: 32-VFQFN Exposed Pad
Datasheet: PDF
Stock: 835
Description: 32 Terminals 8.5V~14.5V 32-Pin IR3623MPBF DC to DC converter ICDUAL SWITCHING CONTROLLER 2 Outputs 200kHz~1.2MHz PWM Signal (Kg)

Inquiry Now

Details

Tags

Parameters
Terminal Finish	MATTE TIN
Subcategory	Switching Regulator or Controllers
Terminal Position	QUAD
Peak Reflow Temperature (Cel)	260
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	IR3623MPBF
Function	Step-Down
Number of Outputs	2
Output Voltage	5.4V
Output Type	PWM Signal
Operating Supply Voltage	14.5V
Input Voltage-Nom	12V
Analog IC - Other Type	DUAL SWITCHING CONTROLLER
Output Configuration	Positive
Output Current	200mA
Voltage - Supply (Vcc/Vdd)	8.5V~14.5V
Max Supply Current	17mA
Control Features	Current Limit, Enable, Frequency Control, Power Good, Sequencing, Soft Start, Tracking
Input Voltage (Min)	8.5V
Topology	Buck
Control Mode	VOLTAGE-MODE
Frequency - Switching	200kHz~1.2MHz
Control Technique	PULSE WIDTH MODULATION
Switcher Configuration	SINGLE
Max Frequency	1.2MHz
Max Duty Cycle	85 %
Clock Sync	Yes
Height	939.8μm
Length	4.9784mm
Width	5mm
Radiation Hardening	No
RoHS Status	RoHS Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Mount	Surface Mount, Through Hole
Mounting Type	Surface Mount
Package / Case	32-VFQFN Exposed Pad
Number of Pins	32
Operating Temperature	-40°C~125°C TJ
Packaging	Tape & Reel (TR)
Published	2007
JESD-609 Code	e3
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	2 (1 Year)
Number of Terminations	32
ECCN Code	EAR99

IR3623MTRPBF Overview

It comes in the 32-VFQFN Exposed Pad package, which makes switching controller suitable for most applications. There is enough capacity in the dc motor controller to generate the output for the 2 input. Packaged in solid enclosures, this pmic has a Tape & Reel (TR) rating. PWM Signal dc switching's outputs (s) can be handled by it. 8.5V~14.5V is the supply voltage and the operating voltage of the dc control. Suitable for a -40°C~125°C TJ dc switcher. With this switching controller, you can switch at 200kHz~1.2MHz. A generalization of dc dc regulator can be made using Surface Mount. The dcdc regulator features Current Limit, Enable, Frequency Control, Power Good, Sequencing, Soft Start, Tracking for efficient switching control. Connected to a DUAL SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. There are a QUAD terminal on the switching converters. The 32 terminations can be used for a wide range of dc switching. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. 12V nominal DC switcher's voltage input. IR3623MPBF can be searched for other relevant dc to dc converter ics. Switching converter has a total of 32 pins. The type is a particular Switching Regulator or Controllers of switching converter. dc dc voltage regulators should have a minimum input voltage of 8.5V. DC regulator outputs 5.4V voltage according to the test statistics. You should note down the dc dc regulator's usual output current of 200mA when you start a project. The duty cycle of the voltage regulator dc to dc can be set to 85 % on power-up or power-down to ensure reliability. DC switcher's Surface Mount, Through Hole qualifies it for most applications and prototypes. There is a maximum frequency of 1.2MHz on this dc regulators. A circuit should contain 14.5V in order to ensure the voltage regulator dc to dc runs safely and reliably. The component might suffer damage if the current exceeds 17mA.

IR3623MTRPBF Features

PWM Signal Outputs
Switching Frequency: 200kHz~1.2MHz
Current Limit, Enable, Frequency Control, Power Good, Sequencing, Soft Start, Tracking
PULSE WIDTH MODULATION
Max Duty Cycle: 85 %