IR3637STRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount, Through Hole |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 400kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | IR3637SPBF |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 21.25V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 25V |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 15mA |
| Output Configuration | Positive |
| Output Current | 15A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~5.5V |
| Max Supply Current | 16mA |
| Quiescent Current | 7mA |
| Control Features | Enable, Soft Start |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Max Input Voltage | 25V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 60ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 60 ns |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 85 % |
| Duty Cycle (Max) | 85% |
| Clock Sync | No |
| Height | 1.5748mm |
| Length | 4.9784mm |
| Width | 3.9878mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
IR3637STRPBF Overview
It comes in a 8-SOIC (0.154, 3.90mm Width) package, so switching controller can be used for most applications. This dc motor controller can be used to generate outputs with 1 numbers. An enclosure of Tape & Reel (TR) is used to package the PMIC. There are Transistor Driver dc switching's output (s) that it can handle. A 4.5V~5.5V voltage is supplied to the dc control and used for operating it. Worked in an dc switcher with a 0°C~125°C TJ rating. It is suitable for general dc dc regulator when it is set to Surface Mount. In order to control switching efficiently, the dcdc regulator features Enable, Soft Start. An analog IC SWITCHING CONTROLLER is connected to the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. An array of 8 terminations of dc switching. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 5V is input. Other relevant dc to dc converter ics will be returned if you search "IR3637SPBF". Pins number 8 of switching converter in total. Specifically, switching converter falls under the Switching Regulator or Controllers category. According to the test statistics, DC regulator outputs 21.25V voltage. You should note that the dc dc regulator's usual output current is 15A. A duty cycle set at 85 % ensures voltage regulator dc to dc reliability during power-on and power-off. DC switcher's Surface Mount, Through Hole makes it qualified for most application and prototype designs. DC switcher'sSwitching controller operates at 400kHz Hz. A circuit should contain 25V in order to ensure the voltage regulator dc to dc runs safely and reliably. A dc switching in a dormant state uses 7mA. The maximum input voltage of the dc switcher is 25V, so users need to limit the voltage accordingly. There is 15mA supply current for it. Components may become damaged if their current exceeds 16mA.
IR3637STRPBF Features
Transistor Driver Outputs
Enable, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 85 %
Frequency: 400kHz
IR3637STRPBF Applications
There are a lot of Infineon Technologies IR3637STRPBF DC to DC converter applications.
- Electric heating, lighting
- Game consoles
- Serial communication converter
- Sensitive electronic devices
- Printing
- Thermal power
- Product burn-in
- Computer rooms
- Printing equipment
- Driver circuits
