IR3651STRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | IR3651SPBF |
| Function | Step-Down |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~13.2V |
| Max Supply Current | 7mA |
| Control Features | Current Limit, Enable, Soft Start |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 100kHz~400kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 10ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 10 ns |
| Switcher Configuration | PUSH-PULL |
| Threshold Voltage | 4.35V |
| Max Frequency | 460kHz |
| Max Duty Cycle | 80 % |
| Height | 1.57mm |
| Length | 8.74mm |
| Width | 3.99mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IR3651STRPBF Overview
It comes in a 14-SOIC (0.154, 3.90mm Width) package, so switching controller can be used for most applications. It is sufficient to generate 1 outputs with this dc motor controller. Packaged in solid enclosures, this pmic has a Tape & Reel (TR) rating. There are Transistor Driver dc switching's output (s) that it can handle. dc control's supply and operating voltages are 4.5V~13.2V. Suitable for a -40°C~125°C TJ dc switcher. There is a switch at 100kHz~400kHz that can be used with this controller. dc dc regulator is made easier with Surface Mount. For efficient switching control, the dcdc regulator features Current Limit, Enable, Soft Start. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. A switching converters's terminal (s) sits at the DUAL position. A variety of 14 terminations are available in dc switching. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 5V. Searching "IR3651SPBF" will return other relevant dc to dc converter ics. Switching converter has a total of 14 pins. It is recommended that the input voltage of the dc dc voltage regulator be 4.5V. You should note down the dc dc regulator's usual output current of 25A when you start a project. A duty cycle set at 80 % ensures voltage regulator dc to dc reliability during power-on and power-off. DC switcher's Surface Mount qualifies it for most applications and prototypes. This dc regulatorhas a max frequency of 460kHz. If the current exceeds 7mA, the component may not operate correctly and may even be damaged.
IR3651STRPBF Features
Transistor Driver Outputs
Switching Frequency: 100kHz~400kHz
Current Limit, Enable, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 80 %
IR3651STRPBF Applications
There are a lot of Infineon Technologies IR3651STRPBF DC to DC converter applications.
- Energy management systems
- Remotely powered electric motors
- Automation technology
- Automatic testing equipment
- Flaw detection equipment
- Industrial robots
- Geothermal power
- CNC system
- Smoke exhaust equipment
- Product testing
