IRS2003STRPBF
| Parameters | |
|---|---|
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 680 ns |
| Rise Time | 170ns |
| Fall Time (Typ) | 90 ns |
| Turn-Off Delay Time | 150 ns |
| Rise / Fall Time (Typ) | 70ns 35ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 290mA 600mA |
| Logic Voltage - VIL, VIH | 0.8V 2.5V |
| Built-in Protections | TRANSIENT; UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 200V |
| Height | 1.4986mm |
| Length | 4.9784mm |
| Width | 3.9878mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Cut Tape (CT) |
| Published | 1996 |
| JESD-609 Code | e3 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 625mW |
| Technology | CMOS |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | IRS2003SPBF |
| Max Output Current | 600mA |
| Power Supplies | 15V |
| Nominal Supply Current | 270μA |
| Power Dissipation | 625mW |
| Output Current | 130mA |
| Max Supply Current | 270μA |
| Propagation Delay | 820 ns |
IRS2003STRPBF Overview
A higher level of flexibility is provided by its 8-SOIC (0.154, 3.90mm Width) package.There is a package in the form of Cut Tape (CT).A total of 2 drivers are integrated into its configuration.There is a mounting bracket in the way of Surface Mount.When the supply voltage is set to 10V~20V, it can demonstrate its superiority.Gate type IGBT, N-Channel MOSFET is designed for it.The allowable temperature range that this device can be operated in is -40°C~150°C TJ.Mosfet driver accepts input of type Inverting, Non-Inverting.Mosfet driver is based on 8 terminations.Mosfet driver is possible to find various related parts under Mosfet drivers base part number IRS2003SPBF.Surface Mount is the way it takes to mount the device.The pins are configured with 8 when designing the chip.A voltage of 15V is required for its operation.There is a maximum output current of 600mA that can be achieved.There are several useful electronic components found in its subcategory of MOSFET Drivers.The high-side voltage - Max (Bootstrap) can be up to 200V.An output current of 130mA is supported.Using 625mW as an example, the maximum power dissipation shows how well it is able to transfer and conduct power loss without becoming overheated.Mosfet gate drivers is recommended to keep the supply current at 270μA to ensure greater stabilMosfet gate driversy.Due to its power supply of 15V, it provides an effective solution to power supply problems for a wide range of applications.
IRS2003STRPBF Features
Embedded in the Cut Tape (CT) package
2 drivers
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 200V
Maximum power dissipation of 625mW
IRS2003STRPBF Applications
There are a lot of Infineon Technologies IRS2003STRPBF gate drivers applications.
- serial peripheral interface (SPI), I2C
- AC-DC Inverters
- Isolated Supplies for controller area network (CAN),
- UPS systems
- Commercial and agricultural vehicles (CAV)
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- High-speed communications
- High-voltage isolated DC-DC converters
- Industrial Power Supplies
- Digitally controlled power supplies
