IRS2004PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 1996 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | IRS2004PBF |
| Number of Outputs | 2 |
| Output Voltage | 220V |
| Max Output Current | 600mA |
| Power Supplies | 15V |
| Nominal Supply Current | 270μA |
| Power Dissipation | 1W |
| Output Current | 130mA |
| Max Supply Current | 270μA |
| Propagation Delay | 820 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 680 ns |
| Max Output Voltage | 20V |
| Rise Time | 170ns |
| Fall Time (Typ) | 90 ns |
| Turn-Off Delay Time | 150 ns |
| Min Output Voltage | 10V |
| Release Time | 150 ns |
| Rise / Fall Time (Typ) | 70ns 35ns |
| Channel Type | Synchronous |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 290mA 600mA |
| Logic Voltage - VIL, VIH | 0.8V 2.5V |
| Built-in Protections | TRANSIENT; UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 200V |
| Height | 4.9276mm |
| Length | 10.8966mm |
| Width | 7.11mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IRS2004PBF Overview
For greater flexibility, the 8-DIP (0.300, 7.62mm) package is adopted.A package of Tube has been used.Ideally, it should be mounted in the direction of Through Hole.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 10V~20V supply voltage.This device is designed with a IGBT, N-Channel MOSFET gate type.In this device, temperatures must not exceed -40°C~150°C TJ.The input type is Non-Inverting.8 terminations constitute its foundation.There are numerous related parts listed under its base part number IRS2004PBF.You mount it with Through Hole.There are 8 pins available in the device.The device is specifically designed to operate at 15V volts.600mA is the maximum output current.Several electronic components are included in its subcategory of MOSFET Drivers.Maximum (Bootstrap) voltage is 200V.In terms of its basis, there are 2 outputs integrated.An output current of 130mA is supported.1W dissipates maximum power without overheating, showing its maximum capability to transfer and conduct power loss.The supply current should be kept at 270μA to ensure higher stability.Due to its 15V power supply, it can solve power supply problems for an array of diverse applications.In this case, the voltage is 220V.A maximum output voltage of 20V should be maintained.
IRS2004PBF Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 200V
Maximum power dissipation of 1W
IRS2004PBF Applications
There are a lot of Infineon Technologies IRS2004PBF gate drivers applications.
- Digitally controlled power supplies
- Commercial air-conditioning (CAC)
- Line drivers
- LCD/LCoS/DLP portable and embedded pico projectors
- Dual-Battery Systems
- General Purpose 3-Phase Inverter
- Uninterruptible Power Supplies (UPS)
- Smart Phones
- PCMCIA applications
- High frequency line drivers
