IRS2011PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 1996 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | IRS2011PBF |
| Number of Outputs | 2 |
| Output Voltage | 220V |
| Max Output Current | 1A |
| Power Supplies | 15V |
| Nominal Supply Current | 300μA |
| Power Dissipation | 1W |
| Output Current | 1A |
| Max Supply Current | 300μA |
| Propagation Delay | 80 ns |
| Input Type | Inverting |
| Turn On Delay Time | 20 ns |
| Input Offset Voltage (Vos) | 200V |
| Rise Time | 40ns |
| Fall Time (Typ) | 35 ns |
| Turn-Off Delay Time | 15 ns |
| Rise / Fall Time (Typ) | 25ns 15ns |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1A 1A |
| Logic Voltage - VIL, VIH | 0.8V 2.7V |
| Built-in Protections | TRANSIENT; UNDER VOLTAGE |
| Height | 4.9276mm |
| Length | 10.8966mm |
| Width | 7.11mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
IRS2011PBF Overview
There is greater flexibility with the 8-DIP (0.300, 7.62mm) package.Tube is the packaging method.It's mounted on the way to Through Hole.By using 10V~20V supply voltage, it is able to demonstrate its superiority.A gate type of N-Channel MOSFET has been used in its design.This device can operate at temperatures up to -40°C~150°C TJ.Mosfet driver accepts input of type Inverting.The configuration is based on 8 terminations.Mosfet driver contains a variety of related parts under Mosfet drivers base part number IRS2011PBF.The mount method is Through Hole.As a result, it is configured with 8 pins when it is designed.In order to operate, a voltage of 15V has to be applied.Mosfet driver is equipped wMosfet driverh an interface chip BUFFER OR INVERTER BASED PERIPHERAL DRIVER.As a maximum, there is 1A limit to the output current.There are several useful electronic components within its subcategory MOSFET Drivers.For its basis, there are 2 outputs integrated.Mosfet driver supports an output current of 1A.The maximum power dissipation of 1W shows its maximum capability to transfer and conduct power loss without overheating.If you want a stable supply current, you should keep it at 300μA.Based on its power supplies of 15V, it solves the problem of power supply failure for a variety of applications.In this case, it produces a voltage of 220V.
IRS2011PBF Features
Embedded in the Tube package
Employing a gate type of N-Channel MOSFET
8 pins
Maximum power dissipation of 1W
IRS2011PBF Applications
There are a lot of Infineon Technologies IRS2011PBF gate drivers applications.
- Industrial Power Supplies
- Uninterruptible Power Supplies (UPS)
- Automotive Applications
- Line drivers
- Refrigerator
- Commercial and agricultural vehicles (CAV)
- High power buffers
- A/D drivers
- Industrial Motor Inverter - Power Tools, Robotics
- High current laser/LED systems
