IRS2011SPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 625mW |
| Technology | CMOS |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | IRS2011SPBF |
| Number of Outputs | 2 |
| Output Voltage | 220V |
| Max Output Current | 1A |
| Power Supplies | 15V |
| Nominal Supply Current | 300μA |
| Power Dissipation | 625mW |
| Output Current | 1A |
| Max Supply Current | 300μA |
| Propagation Delay | 80 ns |
| Input Type | Inverting |
| Turn On Delay Time | 20 ns |
| Input Offset Voltage (Vos) | 200V |
| Rise Time | 40ns |
| Fall Time (Typ) | 35 ns |
| Turn-Off Delay Time | 20 ns |
| Release Time | 60 ns |
| Rise / Fall Time (Typ) | 25ns 15ns |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1A 1A |
| Logic Voltage - VIL, VIH | 0.8V 2.7V |
| Built-in Protections | TRANSIENT; UNDER VOLTAGE |
| Height | 1.4986mm |
| Length | 4.9784mm |
| Width | 3.9878mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IRS2011SPBF Overview
The 8-SOIC (0.154, 3.90mm Width) package offers greater flexibility.A package of Tube has been used.Surface Mount is mounted in the way of the device.When the supply voltage is 10V~20V it is able to demonstrate its superiority.Gate drivers is designed wGate driversh a gate type of N-Channel MOSFET.In this device, temperatures must not exceed -40°C~150°C TJ.Inverting is used as the input type.Mosfet driver consists of 8 terminations as Mosfet drivers foundation.Mosfet driver is possible to find various related parts under Mosfet drivers base part number IRS2011SPBF.You mount it with Surface Mount.At the time of design, it is configured with 8 pins.Specification is for 15V supply voltage operation.Mosfet driver is equipped wMosfet driverh an interface chip BUFFER OR INVERTER BASED PERIPHERAL DRIVER.An output current as high as 1A can be achieved at maximum power.There are several useful electronic components found in its subcategory of MOSFET Drivers.In terms of its basis, there are 2 outputs integrated.1A is the maximum output current supported by the device.Considering its maximum power dissipation, 625mW shows its maximum capacity to transfer and conduct power loss without overheating.For higher stability, the supply current should be kept at 300μA.The power supply of 15V is able to solve the power supply problems for a wide variety of applications.When this voltage is produced, it is marked as 220V.
IRS2011SPBF Features
Embedded in the Tube package
Employing a gate type of N-Channel MOSFET
8 pins
Maximum power dissipation of 625mW
IRS2011SPBF Applications
There are a lot of Infineon Technologies IRS2011SPBF gate drivers applications.
- AC-DC Inverters
- High current laser/LED systems
- A/D drivers
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Solar inverters
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Industrial Modules
- High-voltage isolated DC-DC converters
- Power factor correction (PFC) circuits
- Topologies
