IRS2011STRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 1996 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 625mW |
| Technology | CMOS |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | IRS2011SPBF |
| Max Output Current | 1A |
| Power Supplies | 15V |
| Nominal Supply Current | 300μA |
| Power Dissipation | 625mW |
| Output Current | 1A |
| Max Supply Current | 300μA |
| Propagation Delay | 60 ns |
| Input Type | Inverting |
| Turn On Delay Time | 20 ns |
| Input Offset Voltage (Vos) | 200V |
| Rise Time | 40ns |
| Fall Time (Typ) | 35 ns |
| Turn-Off Delay Time | 60 ns |
| Rise / Fall Time (Typ) | 25ns 15ns |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1A 1A |
| Logic Voltage - VIL, VIH | 0.7V 2.5V |
| Built-in Protections | TRANSIENT; UNDER VOLTAGE |
| Height | 1.4986mm |
| Length | 4.9784mm |
| Width | 3.9878mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IRS2011STRPBF Overview
The 8-SOIC (0.154, 3.90mm Width) package provides greater flexibility.The packaging method is indicated by Tape & Reel (TR).2 drivers are incorporated for its configuration.Surface Mount is the way in which it is mounted.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 10V~20V supply voltage.This device is designed with a N-Channel MOSFET gate type.Mosfet driver is possible to use this device at temperatures as low as -40°C~150°C TJ.Mosfet driver uses Inverting as Mosfet drivers input type.Mosfet driver consists of 8 terminations as Mosfet drivers foundation.Under its base part number IRS2011SPBF, various related parts can be found.You mount it with Surface Mount.When the device is designed, it has 8 pins.A supply voltage of 15V is required for operation.The interface IC of the device is BUFFER OR INVERTER BASED PERIPHERAL DRIVER.The maximum output current can amount to 1A.There are several useful electronic components found in its subcategory of MOSFET Drivers.This device supports a current output of 1A at the output.Its maximum power dissipation of 625mW also demonstrates its maximum ability to transfer power without overheating.If you want a stable supply current, you should keep it at 300μA.Due to its 15V power supply, it can solve power supply problems for an array of diverse applications.
IRS2011STRPBF Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
Maximum power dissipation of 625mW
IRS2011STRPBF Applications
There are a lot of Infineon Technologies IRS2011STRPBF gate drivers applications.
- Isolated switch mode power supplies (SMPS)
- Portable computers
- DC/DC converters
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Automotive Applications
- High power buffers
- Commercial air-conditioning (CAC)
- High frequency line drivers
- Motor Control
- Motor Drives
