IRS2101PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 1996 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | IRS2101PBF |
| Number of Outputs | 2 |
| Output Voltage | 620V |
| Max Output Current | 600mA |
| Power Supplies | 15V |
| Nominal Supply Current | 270μA |
| Power Dissipation | 1W |
| Output Current | 290mA |
| Max Supply Current | 270μA |
| Propagation Delay | 220 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 50 ns |
| Rise Time | 170ns |
| Fall Time (Typ) | 90 ns |
| Turn-Off Delay Time | 50 ns |
| Release Time | 150 ns |
| Rise / Fall Time (Typ) | 70ns 35ns |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Driven Configuration | High-Side or Low-Side |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 290mA 600mA |
| Logic Voltage - VIL, VIH | 0.8V 2.5V |
| Built-in Protections | TRANSIENT; UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 4.9276mm |
| Length | 10.8966mm |
| Width | 7.11mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IRS2101PBF Overview
A higher degree of flexibility is achieved by adopting its 8-DIP (0.300, 7.62mm) package.Gate drivers is packaged in the way of Tube.Ideally, it should be mounted in the direction of Through Hole.WGate driversh a 10V~20V supply voltage, gate drivers is able to demonstrate Gate driverss superiorGate driversy.The gate type on this device is IGBT, N-Channel MOSFET.This device is allowed to operate in a temperature range of -40°C~150°C TJ.This program uses the input type of Non-Inverting.The configuration starts with 8 terminations.Numerous related parts are available for its base part number IRS2101PBF.In this case, Through Hole indicates how the device is to be mounted.At the time of design, it is configured with 8 pins.In addition, it is specifically designed to operate with a supply voltage of 15V.The interface chip of the system is BUFFER OR INVERTER BASED PERIPHERAL DRIVER.There is an output current limit of 600mA for this device.Several electronic components are included in its subcategory of MOSFET Drivers.The high-side voltage - Max (Bootstrap) can be up to 600V.For its basis, there are 2 outputs integrated.This device is capable of delivering 290mA current.Having the maximum power dissipation of 1W indicates its maximum capacity to conduct power losses without overheating.Keeping the supply current at 270μA ensures greater stability.Based on its power supplies of 15V, it solves the problem of power supply failure for a variety of applications.In this case, it produces a voltage of 620V.
IRS2101PBF Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 1W
IRS2101PBF Applications
There are a lot of Infineon Technologies IRS2101PBF gate drivers applications.
- Automotive Applications
- Uninterruptible Power Supplies (UPS)
- Isolated Supplies for Motor Control
- Commercial air-conditioning (CAC)
- Topologies
- DC-DC Converters
- Portable Media Players
- Video amplifiers
- Industrial Power Supplies
- Active Clamp Flyback or Forward and Synchronous Rectifier
