IRS2103SPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 625mW |
| Technology | CMOS |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | IRS2103SPBF |
| Number of Outputs | 2 |
| Output Voltage | 20V |
| Max Output Current | 600mA |
| Power Supplies | 15V |
| Nominal Supply Current | 150μA |
| Power Dissipation | 625mW |
| Output Current | 290mA |
| Max Supply Current | 270μA |
| Propagation Delay | 820 ns |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 60 ns |
| Max Output Voltage | 20V |
| Rise Time | 70ns |
| Fall Time (Typ) | 35 ns |
| Turn-Off Delay Time | 60 ns |
| Release Time | 150 ns |
| Rise / Fall Time (Typ) | 70ns 35ns |
| Channel Type | Independent |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 290mA 600mA |
| Logic Voltage - VIL, VIH | 0.8V 2.5V |
| Built-in Protections | TRANSIENT; UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 1.4986mm |
| Length | 4.9784mm |
| Width | 3.9878mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IRS2103SPBF Overview
Its 8-SOIC (0.154, 3.90mm Width) package is adopted for higher flexibility.Gate drivers is packaged in the way of Tube.In the direction of Surface Mount, gate drivers is mounted.In the absence of a power supply voltage of 10V~20V V, it is able to demonstrate its superiority.A gate type of IGBT, N-Channel MOSFET is used in its design.This device can operate at temperatures up to -40°C~150°C TJ.Inverting, Non-Inverting is the input type used in this program.Mosfet driver consists of 8 terminations as Mosfet drivers foundation.Numerous related parts can be found under its base part number IRS2103SPBF.The mount method is Surface Mount.There are 8 pins available in the device.In order to operate, a voltage of 15V has to be applied.In the maximum case, the output current can be 600mA volts.There are several useful electronic components within its subcategory MOSFET Drivers.There can be a voltage up to 600V on the high-side (Bootstrap).In terms of its basis, there are 2 outputs integrated.The device is capable of delivering a current of 290mA.This device has a maximum power dissipation of 625mW, indicating that it is capable of reducing power loss without overheating.In order to ensure greater stability, it is recommended to keep the supply current at 270μA.Due to its power supply of 15V, it provides an effective solution to power supply problems for a wide range of applications.Mosfet gate drivers outputs 20V as voltage.You should keep the maximum output voltage at 20V as much as possible.
IRS2103SPBF Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 625mW
IRS2103SPBF Applications
There are a lot of Infineon Technologies IRS2103SPBF gate drivers applications.
- 3-Phase Motor Inverter Driver
- High-voltage isolated DC-DC converters
- Video amplifiers
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Refrigerator
- DC-DC Converters
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Dual-Battery Systems
- Motor Control
- Line drivers
