IRS21064PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 1996 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1.6W |
| Technology | CMOS |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | IRS21064PBF |
| Number of Outputs | 2 |
| Output Voltage | 10V |
| Max Output Current | 600mA |
| Power Supplies | 15V |
| Nominal Supply Current | 180μA |
| Power Dissipation | 1.6W |
| Output Current | 290mA |
| Max Supply Current | 180μA |
| Propagation Delay | 300 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 30 ns |
| Rise Time | 220ns |
| Fall Time (Typ) | 80 ns |
| Turn-Off Delay Time | 30 ns |
| Rise / Fall Time (Typ) | 100ns 35ns |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Turn On Time | 0.3 μs |
| Driven Configuration | High-Side or Low-Side |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 290mA 600mA |
| Logic Voltage - VIL, VIH | 0.8V 2.5V |
| Built-in Protections | TRANSIENT; UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 5.33mm |
| Length | 20.19mm |
| Width | 7.11mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IRS21064PBF Overview
For greater flexibility, its 14-DIP (0.300, 7.62mm) package is used.The packaging method is indicated by Tube.In the direction of Through Hole, gate drivers is mounted.In the absence of a 10V~20V supply voltage, it can demonstrate its superiority.The gate type on this device is IGBT, N-Channel MOSFET.This device allows temperatures in the range of -40°C~150°C TJ.Non-Inverting is used as the input type in this program.14 terminations constitute its foundation.Numerous related parts are available for its base part number IRS21064PBF.Through Hole is the way it takes to mount the device.During design, it is configured with 14 pins.A voltage of 15V is required for its operation.BUFFER OR INVERTER BASED PERIPHERAL DRIVER is employed as its interface IC.An output current as high as 600mA can be achieved at maximum power.There are various useful electronic components in its subcategory MOSFET Drivers.Maximum (Bootstrap) voltage can be up to 600V.In terms of its basis, there are 2 outputs integrated.The output current of this device can be set to 290mA.Its maximum power dissipation of 1.6W shows its power loss capacity without overheating.Mosfet gate drivers is recommended that you keep the supply current at 180μA in order to achieve greater stabilMosfet gate driversy.Due to its power supplies of 15V, it solves the power supply problem for a wide range of applications.A voltage of 10V is output by this device.
IRS21064PBF Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel MOSFET
14 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 1.6W
IRS21064PBF Applications
There are a lot of Infineon Technologies IRS21064PBF gate drivers applications.
- Motor controllers
- Digitally controlled power supplies
- High power buffers
- serial peripheral interface (SPI), I2C
- General Purpose 3-Phase Inverter
- DC/DC converters
- AC-DC Inverters
- Commercial and agricultural vehicles (CAV)
- Portable computers
- Line drivers
