IRS21064SPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 14 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | IRS21064SPBF |
| Number of Outputs | 2 |
| Output Voltage | 20V |
| Max Output Current | 600mA |
| Power Supplies | 15V |
| Nominal Supply Current | 180μA |
| Power Dissipation | 1W |
| Output Current | 290mA |
| Max Supply Current | 180μA |
| Propagation Delay | 300 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 30 ns |
| Max Output Voltage | 20V |
| Rise Time | 220ns |
| Fall Time (Typ) | 80 ns |
| Turn-Off Delay Time | 30 ns |
| Release Time | 200 ns |
| Rise / Fall Time (Typ) | 100ns 35ns |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Turn On Time | 0.3 μs |
| Driven Configuration | High-Side or Low-Side |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 290mA 600mA |
| Logic Voltage - VIL, VIH | 0.8V 2.5V |
| Built-in Protections | TRANSIENT; UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 1.4986mm |
| Length | 8.7376mm |
| Width | 3.9878mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IRS21064SPBF Overview
A higher degree of flexibility is achieved by adopting its 14-SOIC (0.154, 3.90mm Width) package.Gate drivers is package in Tube case.Surface Mount is mounted in the way.A supply voltage of 10V~20V demonstrates its superiority.Gate drivers is designed wGate driversh a gate type of IGBT, N-Channel MOSFET.In this device, temperatures must not exceed -40°C~150°C TJ.Mosfet driver uses Non-Inverting as Mosfet drivers input type.Mosfet driver consists of 14 terminations as Mosfet drivers foundation.Mosfet driver contains a variety of related parts under Mosfet drivers base part number IRS21064SPBF.You mount it with Surface Mount.A total of 14 pins are available on the device.With a supply voltage of 15V, it is designed to operate.Mosfet driver is equipped wMosfet driverh an interface chip BUFFER OR INVERTER BASED PERIPHERAL DRIVER.The maximum output current can amount to 600mA.Several electronic components are included in its subcategory of MOSFET Drivers.The high-side voltage - Max (Bootstrap) can be up to 600V.The basis of this model has 2 outputs integrated.This device is capable of delivering 290mA current.Considering its maximum power dissipation, 1W shows its maximum capacity to transfer and conduct power loss without overheating.Mosfet gate drivers is recommended to keep the supply current at 180μA to ensure greater stabilMosfet gate driversy.Due to its power supply of 15V, it provides an effective solution to power supply problems for a wide range of applications.A voltage of 20V is output by this device.A maximum voltage of 20V should be maintained for the output voltage.
IRS21064SPBF Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel MOSFET
14 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 1W
IRS21064SPBF Applications
There are a lot of Infineon Technologies IRS21064SPBF gate drivers applications.
- Pulse transformer drivers
- High frequency line drivers
- High-speed communications
- Automotive Applications
- Portable computers
- Broadcast equipment
- AC-DC Inverters
- Topologies
- LCD/LCoS/DLP portable and embedded pico projectors
- Portable Media Players
