IRS2106PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 1996 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | IRS2106PBF |
| Number of Outputs | 2 |
| Output Voltage | 10V |
| Max Output Current | 600mA |
| Power Supplies | 15V |
| Nominal Supply Current | 180μA |
| Power Dissipation | 1W |
| Output Current | 290mA |
| Max Supply Current | 180μA |
| Propagation Delay | 300 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 30 ns |
| Rise Time | 220ns |
| Fall Time (Typ) | 80 ns |
| Turn-Off Delay Time | 30 ns |
| Rise / Fall Time (Typ) | 100ns 35ns |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Turn On Time | 0.3 μs |
| Driven Configuration | High-Side or Low-Side |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 290mA 600mA |
| Logic Voltage - VIL, VIH | 0.8V 2.5V |
| Built-in Protections | TRANSIENT; UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 4.9276mm |
| Length | 10.8966mm |
| Width | 7.11mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IRS2106PBF Overview
The 8-DIP (0.300, 7.62mm) package provides greater flexibility.A package of Tube has been used.Through Hole is the way in which it is mounted.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 10V~20V supply voltage.A gate type of IGBT, N-Channel MOSFET is used in its design.This device can operate at temperatures up to -40°C~150°C TJ.This program uses the input type of Non-Inverting.Its configuration is based on a total of 8 terminations.Mosfet driver contains a variety of related parts under Mosfet drivers base part number IRS2106PBF.In this case, Through Hole indicates how the device is to be mounted.The pins are configured with 8 when designing the chip.In order to operate, a voltage of 15V has to be applied.The interface chip of the system is BUFFER OR INVERTER BASED PERIPHERAL DRIVER.The maximum output current can amount to 600mA.Mosfet driver includes a number of useful electronic components in Mosfet drivers subcategory of MOSFET Drivers.Maximum (Bootstrap) voltage is 600V.For its basis, 2 outputs are integrated.The output current supported by the device is 290mA.Based on the maximum power dissipation of 1W, it is clear that it is capable of transferring and conducting power losses without becoming overheated.Keeping the supply current at 180μA ensures greater stability.Mosfet gate drivers solves the power supply problems for diverse applications based on Mosfet gate driverss power supplies of 15V.When this voltage is produced, it is marked as 10V.
IRS2106PBF Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 1W
IRS2106PBF Applications
There are a lot of Infineon Technologies IRS2106PBF gate drivers applications.
- UPS systems
- RGB applications
- Pulse transformer drivers
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- High current laser/LED systems
- Solar inverters
- Portable Navigation Devices
- Welding
- 3-Phase Motor Inverter Driver
- Broadcast equipment
