IRS2106SPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 625mW |
| Technology | CMOS |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | IRS2106SPBF |
| Number of Outputs | 2 |
| Output Voltage | 620V |
| Max Output Current | 600mA |
| Power Supplies | 15V |
| Nominal Supply Current | 180μA |
| Power Dissipation | 625mW |
| Output Current | 290mA |
| Max Supply Current | 180μA |
| Propagation Delay | 300 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 30 ns |
| Rise Time | 220ns |
| Fall Time (Typ) | 80 ns |
| Turn-Off Delay Time | 30 ns |
| Release Time | 200 ns |
| Rise / Fall Time (Typ) | 100ns 35ns |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Turn On Time | 0.3 μs |
| Driven Configuration | High-Side or Low-Side |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 290mA 600mA |
| Logic Voltage - VIL, VIH | 0.8V 2.5V |
| Built-in Protections | TRANSIENT; UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 1.4986mm |
| Length | 4.9784mm |
| Width | 3.9878mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IRS2106SPBF Overview
A higher degree of flexibility is achieved by adopting its 8-SOIC (0.154, 3.90mm Width) package.A packaging method of Tube is used.Gate drivers is mounted in the way of Surface Mount.Using a 10V~20V supply voltage, gate drivers is capable of demonstrating Gate driverss superiorGate driversy.Gate drivers is designed wGate driversh a gate type of IGBT, N-Channel MOSFET.-40°C~150°C TJ is the allowed temperature range for this device.The input type is Non-Inverting.Mosfet driver is based on 8 terminations.Numerous related parts are available for its base part number IRS2106SPBF.Surface Mount is the way it takes to mount the device.As a result, it is configured with 8 pins when it is designed.With a supply voltage of 15V, it is designed to operate.As its interface IC, BUFFER OR INVERTER BASED PERIPHERAL DRIVER is being employed.There is an output current limit of 600mA for this device.Within this subcategory of MOSFET Drivers, there are several useful electronic components.Max (Bootstrap) can be as high as 600V.Mosfet driver has been integrated wMosfet driverh a total of 2 outputs for Mosfet drivers basis.Mosfet gate drivers can deliver a current of 290mA.625mW dissipates maximum power without overheating, showing its maximum capability to transfer and conduct power loss.To increase stability, keep the supply current at 180μA.With its power supplies of 15V, it solves the problems of power supply for a variety of applications.As a result, a voltage of 620V is produced.
IRS2106SPBF Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 625mW
IRS2106SPBF Applications
There are a lot of Infineon Technologies IRS2106SPBF gate drivers applications.
- Line drivers
- Active Clamp Flyback or Forward and Synchronous Rectifier
- High frequency line drivers
- White Goods - Air Conditioner, Washing Machine,
- RGB applications
- Pulse transformer drivers
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Motor controllers
- High power buffers
- Uninterruptible Power Supplies (UPS)
