IRS2106STRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 1996 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - with Nickel (Ni) barrier |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 625mW |
| Technology | CMOS |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | IRS2106SPBF |
| Output Voltage | 10V |
| Max Output Current | 600mA |
| Power Supplies | 15V |
| Nominal Supply Current | 180μA |
| Power Dissipation | 625mW |
| Output Current | 290mA |
| Max Supply Current | 180μA |
| Propagation Delay | 300 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 30 ns |
| Rise Time | 220ns |
| Fall Time (Typ) | 80 ns |
| Turn-Off Delay Time | 30 ns |
| Rise / Fall Time (Typ) | 100ns 35ns |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.3 μs |
| Driven Configuration | High-Side or Low-Side |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 290mA 600mA |
| Logic Voltage - VIL, VIH | 0.8V 2.5V |
| Built-in Protections | TRANSIENT; UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 1.4986mm |
| Length | 4.9784mm |
| Width | 3.9878mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IRS2106STRPBF Overview
Its 8-SOIC (0.154, 3.90mm Width) package is adopted for higher flexibility.Tape & Reel (TR) is the packaging method.There are 2 drivers installed for this device.Gate drivers is mounted in the way of Surface Mount.When the supply voltage is 10V~20V it is able to demonstrate its superiority.There is a gate type of IGBT, N-Channel MOSFET in this design.There is a temperature range for this device of -40°C~150°C TJ.The input type is Non-Inverting.Mosfet driver consists of 8 terminations as Mosfet drivers foundation.There are various parts that can be found under its base part number IRS2106SPBF.Mosfet driver is mounted using the Surface Mount method.In the device, there are 8 pins.A supply voltage of 15V is required for operation.Mosfet driver employs an interface chip called BUFFER OR INVERTER BASED PERIPHERAL DRIVER as Mosfet drivers interface chip.As a maximum, there is 600mA limit to the output current.Its subcategory of MOSFET Drivers contains various useful electronic components.Maximum (Bootstrap) voltage is 600V.The device is capable of delivering a current of 290mA.The maximum power dissipation of 625mW shows its maximum capability to transfer and conduct power loss without overheating.To ensure high stability, the supply current should be kept at 180μA.With its power supplies of 15V, it solves the problems of power supply for a variety of applications.As a result, a voltage of 10V is produced.
IRS2106STRPBF Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 625mW
IRS2106STRPBF Applications
There are a lot of Infineon Technologies IRS2106STRPBF gate drivers applications.
- Portable Navigation Devices
- LCD/LCoS/DLP portable and embedded pico projectors
- High-speed communications
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- 3-Phase Motor Inverter Driver
- Smart Phones
- Welding
- DC-DC Converters
- Industrial motor drives - compact, standard, premium, servo drives
- Topologies
