IRS2108PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 1996 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | IRS2108PBF |
| Number of Outputs | 2 |
| Output Voltage | 10V |
| Max Output Current | 600mA |
| Power Supplies | 15V |
| Nominal Supply Current | 1.6mA |
| Power Dissipation | 1W |
| Output Current | 290mA |
| Max Supply Current | 1.6mA |
| Propagation Delay | 300 ns |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 30 ns |
| Rise Time | 220ns |
| Fall Time (Typ) | 80 ns |
| Turn-Off Delay Time | 30 ns |
| Rise / Fall Time (Typ) | 100ns 35ns |
| Channel Type | Independent |
| Turn On Time | 0.3 μs |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 290mA 600mA |
| Logic Voltage - VIL, VIH | 0.8V 2.5V |
| Built-in Protections | TRANSIENT; UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 4.9276mm |
| Length | 10.8966mm |
| Width | 7.11mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IRS2108PBF Overview
Its 8-DIP (0.300, 7.62mm) package is adopted for higher flexibility.Gate drivers is packaged in the way of Tube.Gate drivers is mounted in the way of Through Hole.In the absence of a power supply voltage of 10V~20V V, it is able to demonstrate its superiority.Gate drivers is designed wGate driversh a IGBT, N-Channel MOSFET gate.The allowable temperature range that this device can be operated in is -40°C~150°C TJ.Inverting, Non-Inverting is used as the input type.The configuration starts with 8 terminations.Mosfet driver is possible to find various related parts under Mosfet drivers base part number IRS2108PBF.Mosfet driver is mounted using Through Hole.The pins are configured with 8 when designing the chip.With a supply voltage of 15V, it is designed to operate.Mosfet driver is possible for the output current to be as low as 600mA.There are various useful electronic components in its subcategory MOSFET Drivers.Max (Bootstrap) can be as high as 600V.The basis of this system consists of 2 outputs.An output current of 290mA is supported.The maximum power dissipation of 1W shows its maximum capability to transfer and conduct power loss without overheating.As a precaution, make sure the supply current is kept at 1.6mA.Due to its power supply of 15V, it provides an effective solution to power supply problems for a wide range of applications.In this case, the voltage output is 10V.
IRS2108PBF Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 1W
IRS2108PBF Applications
There are a lot of Infineon Technologies IRS2108PBF gate drivers applications.
- Motor controllers
- Video amplifiers
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Refrigerator
- Motor Control
- Line drivers
- 3-Phase Motor Inverter Driver
- Power factor correction (PFC) circuits
- High current laser/LED systems
- Topologies
