IRS21091PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 1996 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | IRS21091PBF |
| Qualification Status | Not Qualified |
| Max Output Current | 600mA |
| Power Supplies | 15V |
| Nominal Supply Current | 1.6mA |
| Power Dissipation | 1W |
| Output Current | 290mA |
| Max Supply Current | 1.6mA |
| Propagation Delay | 950 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 70 ns |
| Rise Time | 220ns |
| Fall Time (Typ) | 80 ns |
| Turn-Off Delay Time | 200 ns |
| Rise / Fall Time (Typ) | 100ns 35ns |
| Channel Type | Synchronous |
| Number of Drivers | 2 |
| Turn On Time | 0.95 μs |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 290mA 600mA |
| Logic Voltage - VIL, VIH | 0.8V 2.5V |
| Built-in Protections | TRANSIENT; THERMAL |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 4.9276mm |
| Length | 10.8966mm |
| Width | 7.11mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IRS21091PBF Overview
In order to increase flexibility, the package 8-DIP (0.300, 7.62mm) is used.The packaging method is indicated by Tube.Configuration is supported by 2 drivers.There is a mounting bracket in the way of Through Hole.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 10V~20V supply voltage.This device is designed with a IGBT, N-Channel MOSFET gate type.For this device, the temperature range is -40°C~150°C TJ.The input type is Non-Inverting.Its configuration starts with 8 terminations.The base part number IRS21091PBF refers to a number of related parts.You mount it with Through Hole.The pins are configured with 8 when designing the chip.In addition, it is specifically designed to operate with a supply voltage of 15V.There is an output current limit of 600mA for this device.There are several useful electronic components in this subcategory of MOSFET Drivers.Mosfet driver is possible to set the high-side voltage - Max (Bootstrap) to 600V.The device is capable of delivering a current of 290mA.According to its maximum power dissipation, 1W is capable of conducting and transferring a large amount of power without overheating.Mosfet gate drivers is recommended that you keep the supply current at 1.6mA in order to achieve greater stabilMosfet gate driversy.Based on its power supplies of 15V, it solves the problem of power supply failure for a variety of applications.
IRS21091PBF Features
Embedded in the Tube package
2 drivers
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 1W
IRS21091PBF Applications
There are a lot of Infineon Technologies IRS21091PBF gate drivers applications.
- Head-up and Head mounted displays
- Dual-Battery Systems
- Active filtering
- Multicolor LED/laser displays
- Refrigerator
- Portable computers
- Portable Navigation Devices
- PCMCIA applications
- High power buffers
- High-voltage isolated DC-DC converters
