IRS21094PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 1996 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1.6W |
| Technology | CMOS |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | IRS21094PBF |
| Number of Outputs | 2 |
| Output Voltage | 620V |
| Max Output Current | 600mA |
| Power Supplies | 15V |
| Nominal Supply Current | 1.6mA |
| Power Dissipation | 1.6W |
| Output Current | 290mA |
| Max Supply Current | 1.6mA |
| Propagation Delay | 950 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 750 ns |
| Rise Time | 220ns |
| Fall Time (Typ) | 80 ns |
| Turn-Off Delay Time | 200 ns |
| Release Time | 200 ns |
| Rise / Fall Time (Typ) | 100ns 35ns |
| Channel Type | Synchronous |
| Turn On Time | 0.95 μs |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 290mA 600mA |
| Logic Voltage - VIL, VIH | 0.8V 2.5V |
| Built-in Protections | TRANSIENT; UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 5.33mm |
| Length | 20.19mm |
| Width | 7.11mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IRS21094PBF Overview
Its 14-DIP (0.300, 7.62mm) package is adopted for higher flexibility.Gate drivers is package in Tube case.Through Hole is mounted in the way of the device.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 10V~20V supply voltage.Gate type IGBT, N-Channel MOSFET has been used in its design.Temperature range -40°C~150°C TJ is allowed for this device.The input type is Non-Inverting.It's configured with 14 terminations.Numerous related parts can be found under its base part number IRS21094PBF.Mosfet driver is mounted using Through Hole.Mosfet driver is configured wMosfet driverh 14 pins when designing.With a supply voltage of 15V, it is designed to operate.There is a maximum output current of 600mA that can be achieved.Within this subcategory of MOSFET Drivers, there are several useful electronic components.Ideally, the high-side voltage should not exceed 600V.In terms of its basis, there are 2 outputs integrated.This device supports a current output of 290mA at the output.This device has a maximum power dissipation of 1.6W, indicating that it is capable of reducing power loss without overheating.For higher stability, the supply current should be kept at 1.6mA.Due to its power supply of 15V, it provides an effective solution to power supply problems for a wide range of applications.620V is the output voltage.
IRS21094PBF Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel MOSFET
14 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 1.6W
IRS21094PBF Applications
There are a lot of Infineon Technologies IRS21094PBF gate drivers applications.
- Solar power supplies
- High current laser/LED systems
- Telecom switch mode power supplies
- White Goods - Air Conditioner, Washing Machine,
- Commercial and agricultural vehicles (CAV)
- AC-DC Inverters
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Isolated switch mode power supplies (SMPS)
- serial peripheral interface (SPI), I2C
- Active Clamp Flyback or Forward and Synchronous Rectifier
