IRS2109PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 1996 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | IRS2109PBF |
| Number of Outputs | 2 |
| Output Voltage | 20V |
| Max Output Current | 600mA |
| Power Supplies | 15V |
| Nominal Supply Current | 1.6mA |
| Power Dissipation | 1W |
| Output Current | 290mA |
| Max Supply Current | 1.6mA |
| Propagation Delay | 950 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 750 ns |
| Rise Time | 220ns |
| Fall Time (Typ) | 80 ns |
| Turn-Off Delay Time | 200 ns |
| Rise / Fall Time (Typ) | 100ns 35ns |
| Channel Type | Synchronous |
| Turn On Time | 0.95 μs |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 290mA 600mA |
| Logic Voltage - VIL, VIH | 0.8V 2.5V |
| Built-in Protections | TRANSIENT; UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 4.9276mm |
| Length | 10.8966mm |
| Width | 7.11mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IRS2109PBF Overview
In order to increase flexibility, the package 8-DIP (0.300, 7.62mm) is used.Gate drivers is packaged in the way of Tube.In the direction of Through Hole, gate drivers is mounted.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 10V~20V supply voltage.Gate type IGBT, N-Channel MOSFET has been used in its design.The allowable temperature range that this device can be operated in is -40°C~150°C TJ.The input type is Non-Inverting.As a result of its configuration, it contains a maximum of 8 terminations.Under its base part number IRS2109PBF, various related parts can be found.In this case, Through Hole indicates how the device is mounted.At the time of design, it is configured with 8 pins.Mosfet driver is designed specifically to run on 15V volts of power.As a maximum, there is 600mA limit to the output current.There are several useful electronic components found in its subcategory of MOSFET Drivers.Max (Bootstrap) can be as high as 600V.The basis of the model has 2 outputs integrated.An output current of 290mA is supported.Considering its maximum power dissipation, 1W shows its maximum capacity to transfer and conduct power loss without overheating.If you want a stable supply current, you should keep it at 1.6mA.With its power supplies of 15V, it solves the problems of power supply for a variety of applications.In this case, the voltage is 20V.
IRS2109PBF Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 1W
IRS2109PBF Applications
There are a lot of Infineon Technologies IRS2109PBF gate drivers applications.
- LCD/LCoS/DLP portable and embedded pico projectors
- Isolated switch mode power supplies (SMPS)
- Motor Drives
- Portable computers
- Broadcast equipment
- Isolated Gate Driver Supplies
- Dual-Battery Systems
- UPS systems
- Power factor correction (PFC) circuits
- 3-Phase Motor Inverter Driver
