IRS2110PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 1996 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1.6W |
| Technology | CMOS |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | IRS2110PBF |
| Number of Outputs | 2 |
| Output Voltage | 520V |
| Max Output Current | 2.5A |
| Power Supplies | 15V |
| Nominal Supply Current | 340μA |
| Power Dissipation | 1.6W |
| Output Current | 2.5A |
| Max Supply Current | 340μA |
| Propagation Delay | 160 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 10 ns |
| Rise Time | 35ns |
| Fall Time (Typ) | 25 ns |
| Turn-Off Delay Time | 10 ns |
| Release Time | 120 ns |
| Rise / Fall Time (Typ) | 25ns 17ns |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Turn On Time | 0.16 μs |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2.5A 2.5A |
| Logic Voltage - VIL, VIH | 6V 9.5V |
| Turn Off Time | 0.15 μs |
| Built-in Protections | TRANSIENT; UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 500V |
| Height | 4.9276mm |
| Length | 20.1676mm |
| Width | 7.11mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IRS2110PBF Overview
For greater flexibility, the 14-DIP (0.300, 7.62mm) package is adopted.Tube represents the packaging method.Through Hole is mounted in the way.By using 10V~20V supply voltage, it is able to demonstrate its superiority.Gate type IGBT, N-Channel MOSFET has been used in its design.-40°C~150°C TJ is the allowed temperature range for this device.Mosfet driver accepts input of type Non-Inverting.14 terminations constitute its foundation.The base part number IRS2110PBF refers to a number of related parts.You mount it with Through Hole.When designing, the device is configured with 14 pins.A supply voltage of 15V is required for operation.As its interface IC, BUFFER OR INVERTER BASED PERIPHERAL DRIVER is being employed.There is a maximum output current of 2.5A that can be achieved.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.Ideally, the high-side voltage should not exceed 500V.There are 2 outputs integrated for its basis.This device supports a current output of 2.5A at the output.This device has a maximum power dissipation of 1.6W, indicating that it is capable of reducing power loss without overheating.To maintain higher stability, the supply current should always be 340μA.The power supply 15V of the product solves the power supply problem for a variety of applications.A voltage of 520V is output by this device.
IRS2110PBF Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel MOSFET
14 pins
High-side voltage - Max (Bootstrap) of 500V
Maximum power dissipation of 1.6W
IRS2110PBF Applications
There are a lot of Infineon Technologies IRS2110PBF gate drivers applications.
- Refrigerator
- Industrial Motor Inverter - Power Tools, Robotics
- Dual-Battery Systems
- Pulse transformer drivers
- High power buffers
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- 3-Phase Motor Inverter Driver
- Solar inverters
- Industrial Power Supplies
- Motor Control
