IRS2110STRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 1996 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1.25W |
| Technology | CMOS |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | IRS2110SPBF |
| Output Voltage | 10V |
| Max Output Current | 2.5A |
| Power Supplies | 15V |
| Nominal Supply Current | 340μA |
| Power Dissipation | 1.25W |
| Output Current | 2.5A |
| Max Supply Current | 340μA |
| Propagation Delay | 160 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 10 ns |
| Rise Time | 35ns |
| Fall Time (Typ) | 25 ns |
| Turn-Off Delay Time | 10 ns |
| Rise / Fall Time (Typ) | 25ns 17ns |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2.5A 2.5A |
| Logic Voltage - VIL, VIH | 6V 9.5V |
| Turn Off Time | 0.15 μs |
| Built-in Protections | TRANSIENT; UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 500V |
| Height | 2.3622mm |
| Length | 10.4902mm |
| Width | 7.5946mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IRS2110STRPBF Overview
For greater flexibility, its 16-SOIC (0.295, 7.50mm Width) package is used.Gate drivers is packaged in the way of Tape & Reel (TR).For its configuration, it incorporates 2 drivers.Surface Mount is the way in which it is mounted.In the absence of a 10V~20V supply voltage, it can demonstrate its superiority.The gate type on this device is IGBT, N-Channel MOSFET.Mosfet driver is possible to use this device at temperatures as low as -40°C~150°C TJ.Mosfet driver uses Non-Inverting as Mosfet drivers input type.Mosfet driver is based on 16 terminations.Numerous related parts can be found under its base part number IRS2110SPBF.Mosfet driver is mounted using Surface Mount.During design, it is configured with 16 pins.A supply voltage of 15V is required for operation.Mosfet driver is equipped wMosfet driverh an interface chip BUFFER OR INVERTER BASED PERIPHERAL DRIVER.As a maximum, there is 2.5A limit to the output current.This subcategory of MOSFET Drivers has a number of useful electronic components.High-side voltage - Max (Bootstrap) can be as low as 500V.The device is capable of delivering a current of 2.5A.Based on the maximum power dissipation of 1.25W, it is clear that it is capable of transferring and conducting power losses without becoming overheated.If you want a stable supply current, you should keep it at 340μA.Based on its power supplies of 15V, it solves the problem of power supply failure for a variety of applications.The voltage it outputs is 10V.
IRS2110STRPBF Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of IGBT, N-Channel MOSFET
16 pins
High-side voltage - Max (Bootstrap) of 500V
Maximum power dissipation of 1.25W
IRS2110STRPBF Applications
There are a lot of Infineon Technologies IRS2110STRPBF gate drivers applications.
- Isolated Supplies for controller area network (CAN),
- Isolated Supplies for Motor Control
- LCD/LCoS/DLP portable and embedded pico projectors
- High-voltage isolated DC-DC converters
- Pulse transformer drivers
- Automotive Applications
- PCMCIA applications
- Dual-Battery Systems
- Uninterruptible Power Supplies (UPS)
- A/D drivers
