IRS2111PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 1996 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | IRS2111PBF |
| Output Voltage | 620V |
| Max Output Current | 600mA |
| Power Supplies | 15V |
| Nominal Supply Current | 180μA |
| Power Dissipation | 1W |
| Output Current | 290mA |
| Max Supply Current | 180μA |
| Propagation Delay | 950 ns |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 750 ns |
| Max Output Voltage | 20V |
| Rise Time | 130ns |
| Fall Time (Typ) | 65 ns |
| Turn-Off Delay Time | 150 ns |
| Release Time | 150 ns |
| Rise / Fall Time (Typ) | 75ns 35ns |
| Channel Type | Synchronous |
| Number of Drivers | 2 |
| Turn On Time | 0.95 μs |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 290mA 600mA |
| Logic Voltage - VIL, VIH | 8.3V 12.6V |
| Built-in Protections | TRANSIENT; UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 4.9276mm |
| Length | 10.8966mm |
| Width | 7.11mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IRS2111PBF Overview
Its 8-DIP (0.300, 7.62mm) package is adopted for higher flexibility.Gate drivers is package in Tube case.For its configuration, it incorporates 2 drivers.In the direction of Through Hole, gate drivers is mounted.In the absence of a 10V~20V supply voltage, it can demonstrate its superiority.This gate type has a IGBT, N-Channel MOSFET design.The allowable temperature range that this device can be operated in is -40°C~150°C TJ.Mosfet driver accepts input of type Inverting, Non-Inverting.It's configured with 8 terminations.The base part number IRS2111PBF refers to a number of related parts.The mount method is Through Hole.Devices have 8 pins available.The device is specifically designed to function with a supply voltage of 15V V.There is a maximum output current of 600mA.In this subcategory of MOSFET Drivers, there are numerous useful electronic components.High-side voltage - Max (Bootstrap) can be as low as 600V.An output current of 290mA is supported.Considering its maximum power dissipation, 1W shows its maximum capacity to transfer and conduct power loss without overheating.To ensure high stability, the supply current should be kept at 180μA.Mosfet gate drivers solves the power supply problems for diverse applications based on Mosfet gate driverss power supplies of 15V.In this case, the voltage is 620V.Mosfet driver ic is recommended that the maximum output voltage be kept at 20V.
IRS2111PBF Features
Embedded in the Tube package
2 drivers
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 1W
IRS2111PBF Applications
There are a lot of Infineon Technologies IRS2111PBF gate drivers applications.
- White Goods - Air Conditioner, Washing Machine,
- Broadcast equipment
- High-speed communications
- DC-DC Converters
- AC-DC Inverters
- Portable Navigation Devices
- High current laser/LED systems
- Isolated Supplies for controller area network (CAN),
- High power buffers
- Motor controllers
