IRS2111SPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - with Nickel (Ni) barrier |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 625mW |
| Technology | CMOS |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | IRS2111SPBF |
| Output Voltage | 620V |
| Max Output Current | 600mA |
| Power Supplies | 15V |
| Nominal Supply Current | 180μA |
| Power Dissipation | 625mW |
| Output Current | 290mA |
| Max Supply Current | 180μA |
| Propagation Delay | 950 ns |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 750 ns |
| Rise Time | 130ns |
| Fall Time (Typ) | 65 ns |
| Turn-Off Delay Time | 150 ns |
| Release Time | 150 ns |
| Rise / Fall Time (Typ) | 75ns 35ns |
| Channel Type | Synchronous |
| Number of Drivers | 2 |
| Turn On Time | 0.95 μs |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 290mA 600mA |
| Logic Voltage - VIL, VIH | 8.3V 12.6V |
| Built-in Protections | TRANSIENT; UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 1.4986mm |
| Length | 4.9784mm |
| Width | 3.9878mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IRS2111SPBF Overview
For greater flexibility, its 8-SOIC (0.154, 3.90mm Width) package is used.There is a package in the form of Tube.For its configuration, it incorporates 2 drivers.Ideally, it should be mounted in the direction of Surface Mount.In the absence of a power supply voltage of 10V~20V V, it is able to demonstrate its superiority.A gate type of IGBT, N-Channel MOSFET is used in its design.This device allows temperatures in the range of -40°C~150°C TJ.Inverting, Non-Inverting is used as its input type.Its configuration starts with 8 terminations.Numerous related parts can be found under its base part number IRS2111SPBF.In this case, Surface Mount indicates how the device is mounted.Mosfet driver is configured wMosfet driverh 8 pins when designing.In addition, it is specifically designed to operate with a supply voltage of 15V.Mosfet driver is possible for the output current to be as low as 600mA.There are several useful electronic components in this subcategory of MOSFET Drivers.Maximum (Bootstrap) voltage is 600V.The output current supported by the device is 290mA.Using 625mW as an example, the maximum power dissipation shows how well it is able to transfer and conduct power loss without becoming overheated.Mosfet gate drivers is recommended to keep the supply current at 180μA to ensure greater stabilMosfet gate driversy.With its power supplies of 15V, it solves the problems of power supply for a variety of applications.A voltage of 620V is output by this device.
IRS2111SPBF Features
Embedded in the Tube package
2 drivers
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 625mW
IRS2111SPBF Applications
There are a lot of Infineon Technologies IRS2111SPBF gate drivers applications.
- Isolated switch mode power supplies (SMPS)
- Active filtering
- Solar inverters
- Portable computers
- High power buffers
- Smart Phones
- Motor Control
- RGB applications
- A/D drivers
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
