IRS2112SPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1.25W |
| Technology | CMOS |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | IRS2112SPBF |
| Number of Outputs | 2 |
| Output Voltage | 620V |
| Max Output Current | 600mA |
| Power Supplies | 15V |
| Nominal Supply Current | 180μA |
| Power Dissipation | 1.25W |
| Output Current | 200mA |
| Max Supply Current | 180μA |
| Propagation Delay | 180 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 135 ns |
| Rise Time | 130ns |
| Fall Time (Typ) | 65 ns |
| Turn-Off Delay Time | 130 ns |
| Release Time | 105 ns |
| Rise / Fall Time (Typ) | 75ns 35ns |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Turn On Time | 0.18 μs |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 290mA 600mA |
| Logic Voltage - VIL, VIH | 6V 9.5V |
| Built-in Protections | TRANSIENT; UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 2.35mm |
| Length | 10.4902mm |
| Width | 7.5946mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IRS2112SPBF Overview
A higher level of flexibility is provided by its 16-SOIC (0.295, 7.50mm Width) package.A package of Tube has been used.Surface Mount is mounted in the way of the device.Gate drivers is able to show Gate driverss superiorGate driversy on the basis of a supply voltage of 10V~20V.There is a gate type of IGBT, N-Channel MOSFET in this design.This device allows temperatures in the range of -40°C~150°C TJ.Non-Inverting is the input type used in this program.The configuration starts with 16 terminations.Numerous related parts can be found under its base part number IRS2112SPBF.In this case, Surface Mount indicates how the device is to be mounted.At the time of design, it is configured with 16 pins.A voltage of 15V is required for its operation.There is an interface IC called BUFFER OR INVERTER BASED PERIPHERAL DRIVER that is employed in this device.Mosfet driver is possible for the output current to be as low as 600mA.Mosfet driver includes a number of useful electronic components in Mosfet drivers subcategory of MOSFET Drivers.Mosfet driver is possible to set the high-side voltage - Max (Bootstrap) to 600V.For its basis, 2 outputs are integrated.This device supports a current output of 200mA at the output.According to its maximum power dissipation, 1.25W is capable of conducting and transferring a large amount of power without overheating.For higher stability, the supply current should be kept at 180μA.Due to its power supplies of 15V, it solves the power supply problem for a wide range of applications.A voltage of 620V is output by this device.
IRS2112SPBF Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel MOSFET
16 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 1.25W
IRS2112SPBF Applications
There are a lot of Infineon Technologies IRS2112SPBF gate drivers applications.
- Isolated Supplies for controller area network (CAN),
- Power factor correction (PFC) circuits
- Active filtering
- General Purpose 3-Phase Inverter
- 3-Phase Motor Inverter Driver
- Refrigerator
- Industrial Power Supplies
- High power buffers
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Motor Control
