IRS2112STRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 1996 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1.25W |
| Technology | CMOS |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | IRS2112SPBF |
| Max Output Current | 600mA |
| Power Supplies | 15V |
| Nominal Supply Current | 180μA |
| Power Dissipation | 1.25W |
| Output Current | 200mA |
| Max Supply Current | 180μA |
| Propagation Delay | 180 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 135 ns |
| Rise Time | 130ns |
| Fall Time (Typ) | 65 ns |
| Turn-Off Delay Time | 130 ns |
| Rise / Fall Time (Typ) | 75ns 35ns |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.18 μs |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 290mA 600mA |
| Logic Voltage - VIL, VIH | 6V 9.5V |
| Built-in Protections | TRANSIENT; UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 2.3622mm |
| Length | 10.4902mm |
| Width | 7.5946mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IRS2112STRPBF Overview
A higher degree of flexibility is achieved by adopting its 16-SOIC (0.295, 7.50mm Width) package.Gate drivers is package in Tape & Reel (TR) case.A total of 2 drivers are integrated into its configuration.Its recommended mounting way is Surface Mount.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 10V~20V supply voltage.A gate type of IGBT, N-Channel MOSFET has been used in its design.Mosfet driver is possible to use this device at temperatures as low as -40°C~150°C TJ.The input type for this program is Non-Inverting.It's configured with 16 terminations.Mosfet driver contains a variety of related parts under Mosfet drivers base part number IRS2112SPBF.Surface Mount is the way it takes to mount the device.Mosfet driver is configured wMosfet driverh 16 pins when designing.The device is specifically designed to function with a supply voltage of 15V V.Mosfet driver employs an interface chip called BUFFER OR INVERTER BASED PERIPHERAL DRIVER as Mosfet drivers interface chip.600mA is the maximum output current.In this subcategory of MOSFET Drivers, there are numerous useful electronic components.Mosfet driver is possible to set the high-side voltage - Max (Bootstrap) to 600V.The device is capable of delivering a current of 200mA.Based on its maximum power dissipation of 1.25W, it is clear that it is capable of transferring and conducting power loss without overheating.If you want a stable supply current, you should keep it at 180μA.Due to its power supplies of 15V, it solves the power supply problem for a wide range of applications.
IRS2112STRPBF Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of IGBT, N-Channel MOSFET
16 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 1.25W
IRS2112STRPBF Applications
There are a lot of Infineon Technologies IRS2112STRPBF gate drivers applications.
- Portable computers
- Solar inverters
- Commercial and agricultural vehicles (CAV)
- Portable Navigation Devices
- Motor Drives
- White Goods - Air Conditioner, Washing Machine,
- Commercial air-conditioning (CAC)
- Motor controllers
- Isolated switch mode power supplies (SMPS)
- Industrial Modules
