IRS2113MTRPBF
| Parameters | |
|---|---|
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2.5A 2.5A |
| Logic Voltage - VIL, VIH | 6V 9.5V |
| Turn Off Time | 0.19 μs |
| Built-in Protections | TRANSIENT |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height Seated (Max) | 1.05mm |
| Length | 4mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad, 14 Leads |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 1996 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 2.08W |
| Voltage - Supply | 10V~20V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | IRS2113MPBF |
| JESD-30 Code | S-XQCC-N14 |
| Qualification Status | Not Qualified |
| Output Voltage | 20V |
| Max Output Current | 2.5A |
| Power Supplies | 15V |
| Nominal Supply Current | 15μA |
| Power Dissipation | 2.08W |
| Output Current | 2.5A |
| Propagation Delay | 200 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 20 ns |
| Rise Time | 35ns |
| Fall Time (Typ) | 25 ns |
| Turn-Off Delay Time | 120 ns |
| Rise / Fall Time (Typ) | 25ns 17ns |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Output Peak Current Limit-Nom | 2.5A |
IRS2113MTRPBF Overview
A higher degree of flexibility is achieved by adopting its 16-VFQFN Exposed Pad, 14 Leads package.Tape & Reel (TR) is the packaging method.The configuration is supported by 2 drivers.It's mounted on the way to Surface Mount.When the supply voltage is set to 10V~20V, it can demonstrate its superiority.A gate type of IGBT, N-Channel MOSFET has been used in its design.There is a temperature range for this device of -40°C~150°C TJ.Non-Inverting is used as the input type in this program.Its configuration is based on a total of 14 terminations.Numerous related parts are available for its base part number IRS2113MPBF.In this case, Surface Mount indicates how the device is to be mounted.When designing, the device is configured with 16 pins.The device is specifically designed to operate at 15V volts.There is an interface IC called BUFFER OR INVERTER BASED PERIPHERAL DRIVER that is employed in this device.In the maximum case, the output current can be 2.5A volts.There are various useful electronic components in its subcategory Peripheral Drivers.Max (Bootstrap) can be as high as 600V.This device is capable of delivering 2.5A current.The maximum power dissipation of 2.08W shows its maximum capability to transfer and conduct power loss without overheating.With its 15V power supply, it provides power for diverse applications.In this case, it produces a voltage of 20V.
IRS2113MTRPBF Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of IGBT, N-Channel MOSFET
16 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 2.08W
IRS2113MTRPBF Applications
There are a lot of Infineon Technologies IRS2113MTRPBF gate drivers applications.
- General Purpose 3-Phase Inverter
- Isolated switch mode power supplies (SMPS)
- Portable computers
- Isolated Gate Driver Supplies
- White Goods - Air Conditioner, Washing Machine,
- Telecom switch mode power supplies
- Motor controllers
- High-speed communications
- 3-Phase Motor Inverter Driver
- High frequency line drivers
