IRS2113PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 1996 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1.6W |
| Technology | CMOS |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | IRS2113PBF |
| Number of Outputs | 2 |
| Output Voltage | 620V |
| Max Output Current | 2.5A |
| Power Supplies | 15V |
| Nominal Supply Current | 340μA |
| Power Dissipation | 1.6W |
| Output Current | 2.5A |
| Max Supply Current | 340μA |
| Propagation Delay | 160 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 20 ns |
| Rise Time | 35ns |
| Fall Time (Typ) | 25 ns |
| Turn-Off Delay Time | 20 ns |
| Release Time | 120 ns |
| Rise / Fall Time (Typ) | 25ns 17ns |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Turn On Time | 0.16 μs |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2.5A 2.5A |
| Logic Voltage - VIL, VIH | 6V 9.5V |
| Turn Off Time | 0.15 μs |
| Built-in Protections | TRANSIENT; UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 4.9276mm |
| Length | 20.1676mm |
| Width | 7.11mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IRS2113PBF Overview
In order to increase flexibility, the package 14-DIP (0.300, 7.62mm) is used.Gate drivers is packaged in the way of Tube.Its recommended mounting way is Through Hole.When the supply voltage is 10V~20V it is able to demonstrate its superiority.This device is designed with a IGBT, N-Channel MOSFET gate type.This device is allowed to operate in a temperature range of -40°C~150°C TJ.Non-Inverting is used as its input type.14 terminations constitute its foundation.Mosfet driver is possible to find various related parts under Mosfet drivers base part number IRS2113PBF.Mosfet driver is mounted using the Through Hole method.Mosfet driver is configured wMosfet driverh 14 pins when designing.This device operates with 15V supply voltage.The interface IC is referred to as BUFFER OR INVERTER BASED PERIPHERAL DRIVER.In the maximum case, the output current can be 2.5A volts.Mosfet driver includes a number of useful electronic components in Mosfet drivers subcategory of MOSFET Drivers.A high-side voltage can be set up to 600V (Bootstrap).For its basis, 2 outputs are integrated.This device supports a current output of 2.5A at the output.Based on its maximum power dissipation of 1.6W, it is clear that it is capable of transferring and conducting power loss without overheating.Mosfet gate drivers is recommended that you keep the supply current at 340μA in order to achieve greater stabilMosfet gate driversy.Based on its power supplies of 15V, it solves the problem of power supply failure for a variety of applications.The voltage it outputs is 620V.
IRS2113PBF Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel MOSFET
14 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 1.6W
IRS2113PBF Applications
There are a lot of Infineon Technologies IRS2113PBF gate drivers applications.
- Portable computers
- Industrial Modules
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Solar power supplies
- Isolated Supplies for Motor Control
- High-speed communications
- Head-up and Head mounted displays
- Motor Controls
- PCMCIA applications
- Welding
