IRS2117PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 1996 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Base Part Number | IRS2117PBF |
| Number of Outputs | 1 |
| Output Voltage | 620V |
| Max Output Current | 600mA |
| Nominal Supply Current | 340μA |
| Power Dissipation | 1W |
| Output Current | 290mA |
| Max Supply Current | 340μA |
| Propagation Delay | 200 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 125 ns |
| Rise Time | 130ns |
| Fall Time (Typ) | 65 ns |
| Turn-Off Delay Time | 105 ns |
| Release Time | 105 ns |
| Rise / Fall Time (Typ) | 75ns 35ns |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Channel Type | Single |
| Turn On Time | 0.2 μs |
| Driven Configuration | High-Side |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 290mA 600mA |
| Logic Voltage - VIL, VIH | 6V 9.5V |
| Built-in Protections | TRANSIENT; UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 4.9276mm |
| Length | 10.8966mm |
| Width | 7.11mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IRS2117PBF Overview
In order to increase flexibility, the package 8-DIP (0.300, 7.62mm) is used.The packaging method is indicated by Tube.In the direction of Through Hole, gate drivers is mounted.When the supply voltage is set to 10V~20V, it can demonstrate its superiority.This device is designed with a IGBT, N-Channel MOSFET gate type.This device is allowed to operate in a temperature range of -40°C~150°C TJ.Non-Inverting is the input type used in this program.Its configuration is based on a total of 8 terminations.Numerous related parts are available for its base part number IRS2117PBF.Mounting the device requires Through Hole.During design, it is configured with 8 pins.Specification is for 15V supply voltage operation.As its interface IC, BUFFER OR INVERTER BASED PERIPHERAL DRIVER is being employed.The maximum output current can amount to 600mA.There are several useful electronic components found in its subcategory of MOSFET Drivers.A boot strap voltage of 600V is the maximum possible high-side voltage.There are 1 outputs integrated for its basis.This device is capable of delivering 290mA current.Its maximum power dissipation of 1W also demonstrates its maximum ability to transfer power without overheating.Mosfet gate drivers is recommended that you keep the supply current at 340μA in order to achieve greater stabilMosfet gate driversy.In this case, it produces a voltage of 620V.
IRS2117PBF Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 1W
IRS2117PBF Applications
There are a lot of Infineon Technologies IRS2117PBF gate drivers applications.
- serial peripheral interface (SPI), I2C
- DC-DC Converters
- RGB applications
- LCD/LCoS/DLP portable and embedded pico projectors
- High power buffers
- AC-DC Inverters
- DC/DC converters
- Isolated Supplies for Motor Control
- Broadcast equipment
- Isolated Supplies for controller area network (CAN),
