IRS2117SPBF
| Parameters | |
|---|---|
| Supply Voltage | 15V |
| Base Part Number | IRS2117SPBF |
| Number of Outputs | 1 |
| Output Voltage | 620V |
| Max Output Current | 600mA |
| Nominal Supply Current | 340μA |
| Power Dissipation | 625mW |
| Output Current | 290mA |
| Max Supply Current | 340μA |
| Propagation Delay | 200 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 125 ns |
| Rise Time | 130ns |
| Fall Time (Typ) | 65 ns |
| Turn-Off Delay Time | 105 ns |
| Release Time | 105 ns |
| Rise / Fall Time (Typ) | 75ns 35ns |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Channel Type | Single |
| Turn On Time | 0.2 μs |
| Driven Configuration | High-Side |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 290mA 600mA |
| Logic Voltage - VIL, VIH | 6V 9.5V |
| Built-in Protections | TRANSIENT; UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 1.4986mm |
| Length | 4.9784mm |
| Width | 3.9878mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 625mW |
| Technology | CMOS |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
IRS2117SPBF Overview
For greater flexibility, the 8-SOIC (0.154, 3.90mm Width) package is adopted.Gate drivers is packaged in the way of Tube.Surface Mount is the way in which it is mounted.A supply voltage of 10V~20V demonstrates its superiority.Gate drivers is designed wGate driversh a gate type of IGBT, N-Channel MOSFET.This device is allowed to operate in a temperature range of -40°C~150°C TJ.Mosfet driver uses Non-Inverting as Mosfet drivers input type.The configuration is based on 8 terminations.There are various parts that can be found under its base part number IRS2117SPBF.The device is mounted using Surface Mount.As a result, it is configured with 8 pins when it is designed.In addition, it is specifically designed to operate with a supply voltage of 15V.Mosfet driver utilizes the interface IC BUFFER OR INVERTER BASED PERIPHERAL DRIVER.The maximum output current can amount to 600mA.Several electronic components are included in its subcategory of MOSFET Drivers.There can be a voltage up to 600V on the high-side (Bootstrap).The basis of this system consists of 1 outputs.The output current can be set to 290mA.625mW dissipates maximum power without overheating, showing its maximum capability to transfer and conduct power loss.As a precaution, make sure the supply current is kept at 340μA.When this voltage is produced, it is marked as 620V.
IRS2117SPBF Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 625mW
IRS2117SPBF Applications
There are a lot of Infineon Technologies IRS2117SPBF gate drivers applications.
- Solar power supplies
- Industrial Power Supplies
- Isolated Gate Driver Supplies
- Active filtering
- Motor Drives
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Broadcast equipment
- Motor Control
- Motor controllers
- Power factor correction (PFC) circuits
