IRS2117STRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 1996 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 625mW |
| Technology | CMOS |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | IRS2117SPBF |
| Max Output Current | 600mA |
| Nominal Supply Current | 340μA |
| Power Dissipation | 625mW |
| Output Current | 290mA |
| Max Supply Current | 340μA |
| Propagation Delay | 200 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 125 ns |
| Rise Time | 130ns |
| Fall Time (Typ) | 65 ns |
| Turn-Off Delay Time | 105 ns |
| Rise / Fall Time (Typ) | 75ns 35ns |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Turn On Time | 0.2 μs |
| Driven Configuration | High-Side |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 290mA 600mA |
| Logic Voltage - VIL, VIH | 6V 9.5V |
| Built-in Protections | TRANSIENT; UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 1.4986mm |
| Length | 4.9784mm |
| Width | 3.9878mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IRS2117STRPBF Overview
There is greater flexibility with the 8-SOIC (0.154, 3.90mm Width) package.There is a package in the form of Tape & Reel (TR).Gate drivers incorporates wGate driversh 1 drivers for Gate driverss configuration.Ideally, it should be mounted in the direction of Surface Mount.By using 10V~20V supply voltage, it is able to demonstrate its superiority.IGBT, N-Channel MOSFET is the gate type used for this design.For this device, the temperature range is -40°C~150°C TJ.A type of Non-Inverting is used for input in this program.As a result of its configuration, it contains a maximum of 8 terminations.Under its base part number IRS2117SPBF, various related parts can be found.The mount method is Surface Mount.When designing, the device is configured with 8 pins.Mosfet driver is designed specifically to run on 15V volts of power.As its interface IC, BUFFER OR INVERTER BASED PERIPHERAL DRIVER is being employed.An output current as high as 600mA can be achieved at maximum power.Mosfet driver includes a number of useful electronic components in Mosfet drivers subcategory of MOSFET Drivers.Ideally, the high-side voltage should not exceed 600V.The device is capable of delivering a current of 290mA.Its maximum power dissipation of 625mW shows its power loss capacity without overheating.The supply current should be kept at 340μA to ensure higher stability.
IRS2117STRPBF Features
Embedded in the Tape & Reel (TR) package
1 drivers
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 625mW
IRS2117STRPBF Applications
There are a lot of Infineon Technologies IRS2117STRPBF gate drivers applications.
- Portable computers
- Uninterruptible Power Supplies (UPS)
- serial peripheral interface (SPI), I2C
- Solar inverters
- UPS systems
- Industrial Motor Inverter - Power Tools, Robotics
- RGB applications
- Commercial and agricultural vehicles (CAV)
- Industrial Modules
- Active filtering
