IRS2118PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 1996 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Base Part Number | IRS2118PBF |
| Number of Outputs | 1 |
| Output Voltage | 620V |
| Max Output Current | 600mA |
| Nominal Supply Current | 340μA |
| Power Dissipation | 1W |
| Output Current | 290mA |
| Max Supply Current | 340μA |
| Propagation Delay | 200 ns |
| Input Type | Inverting |
| Turn On Delay Time | 125 ns |
| Rise Time | 130ns |
| Fall Time (Typ) | 65 ns |
| Turn-Off Delay Time | 105 ns |
| Release Time | 105 ns |
| Rise / Fall Time (Typ) | 75ns 35ns |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Channel Type | Single |
| Turn On Time | 0.2 μs |
| Driven Configuration | High-Side |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 290mA 600mA |
| Logic Voltage - VIL, VIH | 6V 9.5V |
| Built-in Protections | TRANSIENT; UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 4.9276mm |
| Length | 10.8966mm |
| Width | 7.11mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IRS2118PBF Overview
For greater flexibility, its 8-DIP (0.300, 7.62mm) package is used.A package of Tube has been used.Its recommended mounting way is Through Hole.In the absence of a 10V~20V supply voltage, it can demonstrate its superiority.This gate type has a IGBT, N-Channel MOSFET design.The allowable temperature range that this device can be operated in is -40°C~150°C TJ.This program uses the input type of Inverting.8 terminations constitute its foundation.Numerous related parts are available for its base part number IRS2118PBF.Through Hole is the way it takes to mount the device.There are 8 pins available in the device.This device operates with 15V supply voltage.As its interface IC, BUFFER OR INVERTER BASED PERIPHERAL DRIVER is being employed.There is a maximum output current of 600mA.There are several useful electronic components within its subcategory MOSFET Drivers.Maximum (Bootstrap) voltage is 600V.The basis of the model has 1 outputs integrated.Mosfet gate drivers supports a current output of 290mA.Considering its maximum power dissipation, 1W shows its maximum capacity to transfer and conduct power loss without overheating.For higher stability, the supply current should be kept at 340μA.In this case, it outputs 620V voltage.
IRS2118PBF Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 1W
IRS2118PBF Applications
There are a lot of Infineon Technologies IRS2118PBF gate drivers applications.
- Isolated switch mode power supplies (SMPS)
- Smart Phones
- Portable computers
- Motor Control
- Line drivers
- General Purpose 3-Phase Inverter
- Solar power supplies
- Isolated Gate Driver Supplies
- Broadcast equipment
- DC/DC converters
