IRS2118SPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - with Nickel (Ni) barrier |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 625mW |
| Technology | CMOS |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | IRS2118SPBF |
| Number of Outputs | 1 |
| Output Voltage | 620V |
| Max Output Current | 600mA |
| Nominal Supply Current | 340μA |
| Power Dissipation | 625mW |
| Output Current | 290mA |
| Max Supply Current | 340μA |
| Propagation Delay | 200 ns |
| Input Type | Inverting |
| Turn On Delay Time | 125 ns |
| Rise Time | 130ns |
| Fall Time (Typ) | 65 ns |
| Turn-Off Delay Time | 105 ns |
| Release Time | 105 ns |
| Rise / Fall Time (Typ) | 75ns 35ns |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Channel Type | Single |
| Turn On Time | 0.2 μs |
| Driven Configuration | High-Side |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 290mA 600mA |
| Logic Voltage - VIL, VIH | 6V 9.5V |
| Built-in Protections | TRANSIENT; UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 1.4986mm |
| Length | 4.9784mm |
| Width | 3.9878mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IRS2118SPBF Overview
There is greater flexibility with the 8-SOIC (0.154, 3.90mm Width) package.A packaging method of Tube is used.Surface Mount is mounted in the way.When the supply voltage is 10V~20V it is able to demonstrate its superiority.IGBT, N-Channel MOSFET is the gate type used for this design.This device allows temperatures in the range of -40°C~150°C TJ.Mosfet driver accepts input of type Inverting.It's configured with 8 terminations.Mosfet driver contains a variety of related parts under Mosfet drivers base part number IRS2118SPBF.In this case, Surface Mount indicates how the device is mounted.The pins are configured with 8 when designing the chip.In order to operate, a voltage of 15V has to be applied.The interface IC is referred to as BUFFER OR INVERTER BASED PERIPHERAL DRIVER.In the maximum case, the output current can be 600mA volts.Its subcategory of MOSFET Drivers contains various useful electronic components.Mosfet driver is possible for the high-side voltage - Max (Bootstrap) to be as low as 600V.There are 1 outputs integrated for its basis.Mosfet gate drivers can deliver a current of 290mA.625mW dissipates maximum power without overheating, showing its maximum capability to transfer and conduct power loss.If you want a stable supply current, you should keep it at 340μA.As a result, a voltage of 620V is produced.
IRS2118SPBF Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 625mW
IRS2118SPBF Applications
There are a lot of Infineon Technologies IRS2118SPBF gate drivers applications.
- RGB applications
- Isolated Gate Driver Supplies
- Uninterruptible Power Supplies (UPS)
- Solar inverters
- Motor Control
- Portable Media Players
- Line drivers
- Industrial motor drives - compact, standard, premium, servo drives
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Digitally controlled power supplies
