IRS2118STRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 1996 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - with Nickel (Ni) barrier |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 625mW |
| Technology | CMOS |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | IRS2118SPBF |
| Max Output Current | 600mA |
| Nominal Supply Current | 340μA |
| Power Dissipation | 625mW |
| Output Current | 290mA |
| Max Supply Current | 340μA |
| Propagation Delay | 200 ns |
| Input Type | Inverting |
| Turn On Delay Time | 125 ns |
| Rise Time | 130ns |
| Fall Time (Typ) | 65 ns |
| Turn-Off Delay Time | 105 ns |
| Rise / Fall Time (Typ) | 75ns 35ns |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Turn On Time | 0.2 μs |
| Driven Configuration | High-Side |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 290mA 600mA |
| Logic Voltage - VIL, VIH | 6V 9.5V |
| Built-in Protections | TRANSIENT; UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 1.4986mm |
| Length | 4.9784mm |
| Width | 3.9878mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IRS2118STRPBF Overview
A higher level of flexibility is provided by its 8-SOIC (0.154, 3.90mm Width) package.Tape & Reel (TR) represents the packaging method.This configuration includes 1 drivers.It's mounted on the way to Surface Mount.In the absence of a power supply voltage of 10V~20V V, it is able to demonstrate its superiority.Gate type IGBT, N-Channel MOSFET is designed for it.-40°C~150°C TJ is the allowed temperature range for this device.A type of Inverting is used for input in this program.8 terminations constitute its foundation.The base part number IRS2118SPBF refers to a number of related parts.In this case, Surface Mount indicates how the device is to be mounted.As a result, it is configured with 8 pins when it is designed.Mosfet driver is designed specifically to run on 15V volts of power.As its interface IC, BUFFER OR INVERTER BASED PERIPHERAL DRIVER is being employed.In the maximum case, the output current can be 600mA volts.There are several useful electronic components found in its subcategory of MOSFET Drivers.Ideally, the high-side voltage should not exceed 600V.An output current of 290mA is supported.Its maximum power dissipation of 625mW shows its power loss capacity without overheating.To increase stability, keep the supply current at 340μA.
IRS2118STRPBF Features
Embedded in the Tape & Reel (TR) package
1 drivers
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 625mW
IRS2118STRPBF Applications
There are a lot of Infineon Technologies IRS2118STRPBF gate drivers applications.
- Pulse transformer drivers
- Video amplifiers
- PCMCIA applications
- Line drivers
- Digitally controlled power supplies
- Portable computers
- Portable Navigation Devices
- Industrial Modules
- Industrial motor drives - compact, standard, premium, servo drives
- Isolated Gate Driver Supplies
