IRS2123SPBF
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - with Nickel (Ni) barrier |
| Subcategory | MOSFET Drivers |
| Technology | CMOS |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | IRS2123SPBF |
| Qualification Status | Not Qualified |
| Max Output Current | 500mA |
| Propagation Delay | 240 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 240 ns |
| Rise Time | 200ns |
| Fall Time (Typ) | 200 ns |
| Rise / Fall Time (Typ) | 80ns 80ns |
| Interface IC Type | HALF BRIDGE BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Turn On Time | 240 μs |
| Output Peak Current Limit-Nom | 0.5A |
| Driven Configuration | High-Side |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 500mA 500mA |
| High Side Driver | YES |
| Turn Off Time | 240 μs |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
IRS2123SPBF Overview
Its 8-SOIC (0.154, 3.90mm Width) package provides greater flexibility.Tube is the form of the package.The configuration is supported by 1 drivers.Surface Mount is the way in which it is mounted.Gate drivers is able to show Gate driverss superiorGate driversy on the basis of a supply voltage of 10V~20V.This device is designed with a IGBT, N-Channel MOSFET gate type.The allowable temperature range that this device can be operated in is -40°C~150°C TJ.Non-Inverting is used as its input type.The configuration starts with 8 terminations.Mosfet driver contains a variety of related parts under Mosfet drivers base part number IRS2123SPBF.The mount method is Surface Mount.In the device, there are 8 pins.In addition, it is specifically designed to operate with a supply voltage of 15V.The interface chip of the system is HALF BRIDGE BASED MOSFET DRIVER.The maximum output current can amount to 500mA.There are several useful electronic components within its subcategory MOSFET Drivers.There can be a voltage up to 600V on the high-side (Bootstrap).
IRS2123SPBF Features
Embedded in the Tube package
1 drivers
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 600V
IRS2123SPBF Applications
There are a lot of Infineon Technologies IRS2123SPBF gate drivers applications.
- PCMCIA applications
- DC/DC converters
- Welding
- LCD/LCoS/DLP portable and embedded pico projectors
- Smart Phones
- Power factor correction (PFC) circuits
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Isolated switch mode power supplies (SMPS)
- Portable computers
- Uninterruptible Power Supplies (UPS)
