IRS2127SPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - with Nickel (Ni) barrier |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 625mW |
| Technology | CMOS |
| Voltage - Supply | 12V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | IRS2127SPBF |
| Number of Outputs | 1 |
| Output Voltage | 20V |
| Max Output Current | 600mA |
| Nominal Supply Current | 300μA |
| Power Dissipation | 625mW |
| Output Current | 200mA |
| Max Supply Current | 120μA |
| Propagation Delay | 200 ns |
| Quiescent Current | 60μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 150 ns |
| Rise Time | 130ns |
| Fall Time (Typ) | 65 ns |
| Turn-Off Delay Time | 150 ns |
| Release Time | 150 ns |
| Rise / Fall Time (Typ) | 80ns 40ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Turn On Time | 0.2 μs |
| Output Peak Current Limit-Nom | 0.6A |
| Driven Configuration | High-Side |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 290mA 600mA |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.5V |
| Turn Off Time | 0.2 μs |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IRS2127SPBF Overview
There is greater flexibility with the 8-SOIC (0.154, 3.90mm Width) package.Tube represents the packaging method.In the direction of Surface Mount, gate drivers is mounted.By using 12V~20V supply voltage, it is able to demonstrate its superiority.Gate drivers is designed wGate driversh a IGBT, N-Channel MOSFET gate.Temperature range -40°C~150°C TJ is allowed for this device.Mosfet driver accepts input of type Non-Inverting.Mosfet driver is based on 8 terminations.There are numerous related parts listed under its base part number IRS2127SPBF.The device is mounted using Surface Mount.As a result, it is configured with 8 pins when it is designed.Mosfet driver is designed specifically to run on 15V volts of power.BUFFER OR INVERTER BASED MOSFET DRIVER is employed as its interface IC.Mosfet driver is possible for the output current to be as low as 600mA.This subcategory of MOSFET Drivers has a number of useful electronic components.The high-side voltage - Max (Bootstrap) can be up to 600V.The basis of this system consists of 1 outputs.The output current can be set to 200mA.The maximum power dissipation of 625mW shows its maximum capability to transfer and conduct power loss without overheating.As a precaution, make sure the supply current is kept at 120μA.In this case, it outputs 20V voltage.A part's quiescent current at 60μA is the amount of current consumed when it is not affected by external factors.
IRS2127SPBF Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 625mW
Quiescent current of 60μA
IRS2127SPBF Applications
There are a lot of Infineon Technologies IRS2127SPBF gate drivers applications.
- Motor Drives
- Telecom switch mode power supplies
- Line drivers
- Isolated Supplies for controller area network (CAN),
- 3-Phase Motor Inverter Driver
- LCD/LCoS/DLP portable and embedded pico projectors
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Isolated Supplies for Motor Control
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Commercial and agricultural vehicles (CAV)
