IRS21281STRPBF
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 1996 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 125Ohm |
| Terminal Finish | Matte Tin (Sn) - with Nickel (Ni) barrier |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 625mW |
| Technology | CMOS |
| Voltage - Supply | 9V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | IRS21281SPBF |
| Max Output Current | 600mA |
| Nominal Supply Current | 120μA |
| Power Dissipation | 625mW |
| Output Current | 200mA |
| Max Supply Current | 120μA |
| Propagation Delay | 200 ns |
| Input Type | Inverting |
| Turn On Delay Time | 150 ns |
| Rise Time | 130ns |
| Fall Time (Typ) | 65 ns |
| Turn-Off Delay Time | 150 ns |
| Rise / Fall Time (Typ) | 80ns 40ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Turn On Time | 0.2 μs |
| Output Peak Current Limit-Nom | 0.6A |
| Driven Configuration | High-Side |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 290mA 600mA |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.5V |
| Turn Off Time | 0.2 μs |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 1.4986mm |
| Length | 4.9784mm |
| Width | 3.9878mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
IRS21281STRPBF Overview
Its 8-SOIC (0.154, 3.90mm Width) package is adopted for higher flexibility.Gate drivers is packaged in the way of Tape & Reel (TR).For its configuration, it incorporates 1 drivers.Ideally, it should be mounted in the direction of Surface Mount.In the absence of a power supply voltage of 9V~20V V, it is able to demonstrate its superiority.This device is designed with a IGBT, N-Channel MOSFET gate type.The allowable temperature range that this device can be operated in is -40°C~150°C TJ.Inverting is the input type used in this program.8 terminations constitute its foundation.Mosfet driver is possible to find various related parts under Mosfet drivers base part number IRS21281SPBF.Mosfet driver is mounted using the Surface Mount method.There are 8 pins available in the device.This device operates with 15V supply voltage.There is an interface IC called BUFFER OR INVERTER BASED MOSFET DRIVER that is employed in this device.An output current as high as 600mA can be achieved at maximum power.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.Mosfet driver is possible for the high-side voltage - Max (Bootstrap) to be as low as 600V.The output current can be set to 200mA.Its maximum power dissipation of 625mW also demonstrates its maximum ability to transfer power without overheating.To ensure high stability, the supply current should be kept at 120μA.Device operation requires a resistance of 125Ohm.
IRS21281STRPBF Features
Embedded in the Tape & Reel (TR) package
1 drivers
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 625mW
Resistance of 125Ohm
IRS21281STRPBF Applications
There are a lot of Infineon Technologies IRS21281STRPBF gate drivers applications.
- LCD/LCoS/DLP portable and embedded pico projectors
- DC/DC converters
- General Purpose 3-Phase Inverter
- Power factor correction (PFC) circuits
- serial peripheral interface (SPI), I2C
- Uninterruptible Power Supplies (UPS)
- Industrial Motor Inverter - Power Tools, Robotics
- Portable computers
- Isolated switch mode power supplies (SMPS)
- Commercial and agricultural vehicles (CAV)
