IRS21531DSTRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Cut Tape (CT) |
| Published | 1996 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - with Nickel (Ni) barrier |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 625mW |
| Technology | CMOS |
| Voltage - Supply | 10V~15.4V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Frequency | 100kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | IRS21531DSPBF |
| Number of Outputs | 2 |
| Max Output Current | 260mA |
| Power Supplies | 14V |
| Nominal Supply Current | 5mA |
| Power Dissipation | 625mW |
| Output Current | 260mA |
| Max Supply Current | 5mA |
| Input Type | RC Input Circuit |
| Rise Time | 220ns |
| Fall Time (Typ) | 80 ns |
| Rise / Fall Time (Typ) | 120ns 50ns |
| Channel Type | Synchronous |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 180mA 260mA |
| Switching Frequency | 600kHz |
| Built-in Protections | UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 1.4986mm |
| Length | 4.9784mm |
| Width | 3.9878mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IRS21531DSTRPBF Overview
For greater flexibility, its 8-SOIC (0.154, 3.90mm Width) package is used.A packaging method of Cut Tape (CT) is indicated.Ideally, it should be mounted in the direction of Surface Mount.When the supply voltage is 10V~15.4V it is able to demonstrate its superiority.A gate type of N-Channel MOSFET has been used in its design.Mosfet driver is possible to use this device at temperatures as low as -40°C~125°C TJ.The input type for this program is RC Input Circuit.Mosfet driver consists of 8 terminations as Mosfet drivers foundation.There are various related parts under its base part number IRS21531DSPBF.Mounting the device requires Surface Mount.At the time of design, it is configured with 8 pins.This device operates with 14V supply voltage.In the maximum case, the output current can be 260mA volts.There are various useful electronic components in its subcategory MOSFET Drivers.The high-side voltage - Max (Bootstrap) can be up to 600V.In terms of its basis, there are 2 outputs integrated.An output current of 260mA is supported.Based on the maximum power dissipation of 625mW, it is clear that it is capable of transferring and conducting power losses without becoming overheated.To maintain higher stability, the supply current should always be 5mA.With its power supplies of 14V, it solves the power supply problems for diverse applications.By using the frequency 100kHz, we can increase efficiency.
IRS21531DSTRPBF Features
Embedded in the Cut Tape (CT) package
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 625mW
IRS21531DSTRPBF Applications
There are a lot of Infineon Technologies IRS21531DSTRPBF gate drivers applications.
- Power factor correction (PFC) circuits
- General Purpose 3-Phase Inverter
- Welding
- DC/DC converters
- Multicolor LED/laser displays
- Smart Phones
- Isolated Supplies for Motor Control
- Dual-Battery Systems
- Refrigerator
- High frequency line drivers
