banner_page

IRS2166DPBF

14V PMIC IRS2166DPBF 16 Pin 40kHz~46kHz 14V 16-DIP (0.300, 7.62mm)


  • Manufacturer: Infineon Technologies
  • Nocochips NO: 376-IRS2166DPBF
  • Package: 16-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 752
  • Description: 14V PMIC IRS2166DPBF 16 Pin 40kHz~46kHz 14V 16-DIP (0.300, 7.62mm) (Kg)

Details

Tags

Parameters
Mount Through Hole
Mounting Type Through Hole
Package / Case 16-DIP (0.300, 7.62mm)
Number of Pins 16
Operating Temperature -25°C~125°C
Packaging Tube
Published 2007
JESD-609 Code e3
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Type PFC/Ballast Controller
Terminal Finish MATTE TIN
Subcategory Switching Regulator or Controllers
Max Power Dissipation 1.8W
Voltage - Supply 11.5V~16.6V
Terminal Position DUAL
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 14V
Frequency 40kHz~46kHz
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number IRS2166DPBF
Output Voltage 20V
Input Voltage-Nom 14V
Power Supplies 14V
Number of Channels 2
Operating Supply Current 20mA
Nominal Supply Current 20mA
Power Dissipation 1.8W
Output Current 260mA
Max Supply Current 20mA
Input Voltage (Min) 11.5V
Input Voltage (Max) 14.6V
Rise Time 120ns
Fall Time (Typ) 50 ns
Switcher Configuration PUSH-PULL
Release Time 50 ns
Dimming No
Height 4.94mm
Length 21.33mm
Width 7.11mm
REACH SVHC No SVHC
RoHS Status RoHS Compliant
Lead Free Lead Free

IRS2166DPBF Overview


Tube's materials have been used in the packaging.Its low package cost attracts electronics manufacturers.This component is mounted to the PCB using Through Hole.Applications of Type PFC/Ballast Controller qualify it for standard grade.The power supply voltage ensures that the unit functions properly.Always keep it at -25°C~125°C.However, accuracy can still be maintained at 40kHz~46kHz frequency.Best part of the device is the number IRS2166DPBF.With 16 terminations, it is built.A 1 function is used to run the device.In this case, 20mA is the supply current.The pin number for the component stays at 16.It is necessary to use a source of 14V at all times in order to power the component constantly.There is a Switching Regulator or Controllers Subcategory for this item.In the Through Hole-axis, the mounting is performed.In this case, 260mA is set as the output current.It can be operated with a minimum input voltage of 11.5V.14.6V is the maximum input voltage.Supply 14V is present on the device.It is possible to control this device using 20V's output.It can handle maximum supply temperatures of 20mA.2 channels are currently available.

IRS2166DPBF Features


Mounting type of Through Hole
Supply voltage of 14V
Switching Regulator or Controllers subcategory

IRS2166DPBF Applications


There are a lot of Infineon Technologies IRS2166DPBF Lighting Controllers applications.

  • Spot welding
  • To reduce power noise & signal noise
  • To enhance power efficiency
  • Decoupling or bypassing
  • Flashtube ignition
  • Power factor correction (PFC)
  • Signal decoupling & power bypass
  • Motor control
  • Smoothing
  • UPS buffering

Write a review

Note: HTML is not translated!
    Bad           Good