IRS21814MPBF
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | QFN |
| Number of Pins | 16 |
| Published | 2012 |
| JESD-609 Code | e3 |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Subcategory | MOSFET Drivers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 14 |
| JESD-30 Code | S-XQCC-N14 |
| Max Output Current | 2.3mA |
| Power Supplies | 15V |
| Temperature Grade | AUTOMOTIVE |
| Max Supply Voltage | 20V |
| Min Supply Voltage | 10V |
| Power Dissipation-Max | 2.08W |
| Power Dissipation | 2.08W |
| Current - Output | 2.3A |
| Propagation Delay | 330 ns |
| Turn On Delay Time | 35 ns |
| Rise Time | 60ns |
| Fall Time (Typ) | 35 ns |
| Turn-Off Delay Time | 35 ns |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Output Peak Current Limit-Nom | 2.5A |
| Turn Off Time | 0.33 µs |
| Built-in Protections | TRANSIENT |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 1.05mm |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
IRS21814MPBF Overview
A higher degree of flexibility is achieved by adopting its QFN package.The configuration is supported by 2 drivers.Its configuration starts with 14 terminations.Mosfet driver is mounted using Surface Mount.The pins are configured with 16 when designing the chip.In order to operate, a voltage of 15V has to be applied.The interface chip of the system is BUFFER OR INVERTER BASED PERIPHERAL DRIVER.There is an output current limit of 2.3mA for this device.There are several useful electronic components in this subcategory of MOSFET Drivers.The board contains 14 pins for component connections.Mosfet gate drivers is permissible to set the operating temperature to 125°C.-40°C is the minimum permissible operating temperature.The power supply 15V of the product solves the power supply problem for a variety of applications.For operation, the supply voltage of 20V is the maximum value.In order for the device to operate, a supply voltage of 10V must be applied.The current it outputs is 2.3A.
IRS21814MPBF Features
2 drivers
16 pins
IRS21814MPBF Applications
There are a lot of International Rectifier IRS21814MPBF gate drivers applications.
- Telecom switch mode power supplies
- High current laser/LED systems
- Isolated Supplies for controller area network (CAN),
- Welding
- Automotive Applications
- Refrigerator
- Isolated Supplies for Motor Control
- A/D drivers
- Dual-Battery Systems
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
